Difference between revisions of "Gravity Iron"
Jump to navigation
Jump to search
Jleonardson (talk | contribs) |
Jleonardson (talk | contribs) |
||
Line 25: | Line 25: | ||
# The iron shoe can be attached to prevent glossed fabric | # The iron shoe can be attached to prevent glossed fabric | ||
# Turn off power and unplug the iron when not in use | # Turn off power and unplug the iron when not in use | ||
+ | # Close the water tank valve and press the steam button relieve pressure | ||
# Allow 30 minutes at least for the iron to cool | # Allow 30 minutes at least for the iron to cool | ||
# '''Keep flammable materials away''' from the iron while it in use (it is over 200˚C) | # '''Keep flammable materials away''' from the iron while it in use (it is over 200˚C) | ||
[[Category:Textiles]] | [[Category:Textiles]] | ||
[[Category:Arts]] | [[Category:Arts]] |
Revision as of 21:17, 1 September 2023
Owner/Loaner | PS:One |
---|---|
Serial Number | 181133 |
Make/Model | 20U Industrial |
Arrival Date | 2023 |
Usability | yes |
Contact | Lydia Miller |
Where | Arts |
Authorization Needed | no |
Hackable | no |
Estimated Value | ~$120 |
Host Area | Arts |
Gravity Iron Model Silver ES-85AF
Status
Ready. On the pressing board. When not in use unplug the iron and rest it horizontally on its silicon rest.
Rules
- The water tank needs to hang more than 5 ft. above the ironing surface
- Plug in to a power socket and turn on the power switch
- Important: Do not place the iron upright when not in use
- Set the Temperature Control to 4 and wait 5 minutes
- Set the temperature; 1, 2: Pre-heating 3: Silk (low) 4: Cotton and wool (medium) 5: Other thick clothes (high)
- Turn the water tank valve counterclockwise and press the steam switch
- Press the steam switch for 1–2 seconds and pause for 3–4 seconds. Do not hold the steam switch longer than 5–6 seconds
- The iron shoe can be attached to prevent glossed fabric
- Turn off power and unplug the iron when not in use
- Close the water tank valve and press the steam button relieve pressure
- Allow 30 minutes at least for the iron to cool
- Keep flammable materials away from the iron while it in use (it is over 200˚C)