* A VFD has been fitted, this allows the machine to run on a 110v circuit and provides a variable speed control. The RPM display shows the RPM of the drive wheel (16"), the blade speed will be approx. 4.18 * RPM. The power switch on the left side of the control box applies power to the VFD. The on/off button on the front panel controls the blade and serves as an emergency switch, pull for on push for off. The dial controls RPM.
+
* A VFD has been fitted, this allows the machine to run on a 110v circuit and provides a variable speed control. The RPM display shows the RPM of the drive wheel (16"), the blade speed will be approx. 4.18 * RPM. The power switch on the left side of the control box applies power to the VFD. The on/off button on the front panel and the limit switch control the blade, the button must be out for on and the limit switch up to run. The button switch serves as an emergency switch, pull for on push for off. The dial controls RPM.
−
Open Tasks: 1. Label control box 2. Modify gear cover or fabricate new one. 3. Wire end-of-cut switch to control box.
+
Open Tasks: 1. Label control box 2. Modify gear cover or fabricate new one. 3. Wire limit switch switch to control box.