Difference between revisions of "User:Mct/locker"
< User:Mct
Jump to navigation
Jump to search
m (→misc) |
m (→misc) |
||
Line 260: | Line 260: | ||
! desc | ! desc | ||
|- | |- | ||
− | | | + | | 10 |
| medium | | medium | ||
| plastic bags | | plastic bags |
Revision as of 00:32, 10 September 2017
no. 16
consumables
abrasives
count | grit | size |
---|---|---|
5 | 240 | 9" x 11" |
5 | 500 | 9" x 11" |
5 | 1000 | 9" x 11" |
5 | 2500 | 9" x 11" |
count | desc | state |
---|---|---|
1 | sanding sponge | unused |
7 pads | 0000 steel wool | unused |
fasteners
internal
count | diameter | pitch | type |
---|---|---|---|
1 | 1/4" | 20 | machine screw |
12 | #10 | 32 | machine screw |
46 | #10 | 32 | cap nuts |
count | inside diameter | outside diameter |
---|---|---|
4 | 1/4" | 5/8" |
26 | 3/16" | 7/16" |
external
count | diameter | pitch | length | shoulder | head type |
---|---|---|---|---|---|
2 | 1/4" | 20 | 1.25" | 1/2" | knurled hex socket |
4 | #10 | 32 | 3/8" | none | philips hex head |
count | size |
---|---|
1 box | #6, 1" |
1 box | #6, 3/4" |
many | assorted |
count | contact type | thread | length |
---|---|---|---|
many | flat | 6-32 | 1/8" |
misc
quantity | desc |
---|---|
10 | 5/16" OD x 19/32" disc |
1 roll | 1/2" strip |
quantity | desc | state |
---|---|---|
4 fl oz | cpvc cement | opened |
15 fl oz | wd-40 | mostly full |
2 fl oz | CA accelerator | opened |
2 fl oz | cold bluing | partially used |
quantity | desc | state |
---|---|---|
1 roll | masking tape | partially used |
4 g | "ultragel" CA | opened |
25 mL | 5 minute epoxy | opened |
8 fl oz | titebond ii wood glue | opened |
count | desc | state |
---|---|---|
1 pair | safety glasses with lanyard | no damage |
6 pair | heavy-duty nitrile gloves | unused |
1 | waxed canvas apron | dirty; no wear |
count | desc | state |
---|---|---|
2 | terry towel | new |
1 | terry towel | dirty |
1 | terry towel | dirty, torn, with chamfer shards |
1 pair | socks | new |
30" | 12" x 1/4" roll, neoprene | dirty, 1 mangled edge |
count | size | desc |
---|---|---|
10 | medium | plastic bags |
writing
count | desc |
---|---|
1 | silver paint marker |
1 | king size sharpie |
2 | fine rollerball |
1 | extrafine rollerball |
3 (R, B, K) | thin permanent marker |
2 | mechanical pencil |
1 | stick eraser |
count | desc |
---|---|
1 sheaf | quad graph paper |
1 roll | masking paper |
stock metal
count | length | cross-section | material |
---|---|---|---|
4 | 10" | 1" x .13" | Al |
3 | 11" | 3/8" OD round | zinc-plated steel |
1 | 3" | 1.625" OD round | 6061 Al |
1 | 2" | 4cm x 4cm | 6061 Al |
3 | 10" | 1/4" OD round | Al |
count | length | cross-section | wall | material |
---|---|---|---|---|
1 | 8.25" | 1.5" x 1.5" square | 1/8" | 6061 Al |
1 | 6.25" | 1.5" OD round | 0.05" | 6061 Al |
count | desc | material |
---|---|---|
several | street sweeper bristle | 8" avg length; unrusted to rusty |
2 | small cuboid | 6061 Al |
1 | small cuboid | 4130 steel |
1 | 1" x 1.625" OD disc | 6061 Al |
2 | 1lb ingot | ac casting alloy |
cutters
rotary
count | maj diameter | min diameter | wear |
---|---|---|---|
1 | 7/16" | 3/16" | none |
1 | 5/16" | 1/8" | none |
1 | 1/4" | 7/64" | none |
1 | 3/16" | 5/64" | none |
1 | 1/8" | 3/64" | none |
count | size | length | shank | flutes | material | desc | state |
---|---|---|---|---|---|---|---|
1 | 1/4" | 1" | 1/4" | 2, straight | carbide | end mill | used |
1 | 1/8" | 3/8" | 1/4" | 2, straight | carbide | end mill | new |
1 | 1/16" | 1/4" | 1/4" | 2, straight | carbide | end mill | new |
1 | 3/4" | n/a | 1/2" | 2, straight | carbide | v bit | used |
count | size | length | shank | flutes | desc | state |
---|---|---|---|---|---|---|
1 | 1/2" | 13/16" | 1/2" | 2 | TiN coated HSS double end | new |
1 | 1/2" | 13/16" | 1/2" | 2 | HSS double end | used |
1 | 1/4" | 1/2" | 3/8" | 2 | HSS double end for Al | used |
count | type | thread | state |
---|---|---|---|
1 | starting | 6-32 | no wear |
1 | bottoming | 6-32 | no wear |
count | desc | state |
---|---|---|
1 | 2fl 90 deg 1/4" carbide chamfer mill | no wear |
1 | 6fl 90 deg 1" countersink bit | no wear |
4 | drill & countersink combo (nos. 6, 8, 10, 12) for wood | no wear |
drill bits
count | diameter | finish | wear |
---|---|---|---|
1 | no. 37 | black oxide | small built-up edge |
1 | no. 22 | black oxide | none |
1 | no. 8 | black oxide | none |
count | diameter | finish | wear |
---|---|---|---|
1 | 1/16" | black oxide | none |
1 | 5/64" | black oxide | none |
1 | 3/32" | black oxide | none |
2 | 7/64" | black oxide | none |
1 | 1/8 | black oxide | none |
1 | 5/32" | black oxide | none |
1 | 3/16" | black oxide | none |
linear
count | length | finish | cut | profile | state |
---|---|---|---|---|---|
1 | 10" | mill bastard | double-cut | tapered rectangular | no wear |
1 | 6" | bastard | double | tapered triangular | no wear |
12 | 5.5" | precision no. 2 | double | needle file set; ass. profiles | no wear |
1 | 4" | bastard | double | tapered rectangular | no wear |
5 | 3" | diamond | n/a | needle file set; ass. profiles | no wear |
tools
drivers
type | size | state |
---|---|---|
slot | 3/64" | no wear |
slot | 1/16" | no wear |
slot | 5/64" | no wear |
slot | 3/32" | no wear |
phillips | no. 00 | no wear |
phillips | no. 000 | no wear |
hexalobe | t3 | no wear |
hexalobe | t4 | no wear |
hexalobe | t5 | no wear |
hexalobe | t6 | no wear |
hexalobe | t7 | no wear |
hexalobe | t8 | no wear |
pentalobe | p2 (.8mm) | no wear |
hex | .05" | no wear |
hex | 1/16" | no wear |
hex | 5/64" | no wear |
clamping
count | taper | size | state |
---|---|---|---|
1 | er-25 | 1/4" | no wear |
1 | er-25 | 1/2" | no wear |
count | desc | state |
---|---|---|
1 | hemostats | no wear |
1 | tweezers | no wear |
1 | hook-tip clamping tweezers | no wear |
measuring
count | desc | state |
---|---|---|
1 | indicator mount with 3/8" ID hole | modified |
1 | magnetic base | no wear |
1 | 5/16"-18, 5/8" OD adapter for indicator arm | no wear |
count | desc | state |
---|---|---|
1 | 0.2" edge finder | no wear |
1 | 6" x 0.0005" calipers | no wear |
1 | 6ft tape measure with magnetic plate | no wear |
1 | 1" x 6" steel ruler | no wear |
1 | 1/2" x 6" steel ruler with depth clip | clip wear lines on reverse |
1 | 4" pocket calipers | no wear; bit stiff |
misc
count | desc | state |
---|---|---|
1 | 2-tip hook | one hook broken off |
1 | hex key for countersink bits | no wear |
1 | carbide-tip scriber | no wear |
1 | interchangeable-head pick set | no wear |
1 | double-lens loupe w/ LED | no wear |
count | desc |
---|---|
1 | pen tube |
1 | 1.5" OD, 1" brass cylinder |
1 | ~12" acrylic straight edge |
1 | vice stop |