Difference between revisions of "Wood Shop Dust Collection"
Line 8: | Line 8: | ||
==Automating this stuff== | ==Automating this stuff== | ||
− | No one will use it if it doesn't turn on automatically. | + | No one will use it if it doesn't turn on automatically. It *must* be automatic. I've read that using less than 3" ducts with a large 15-16" blower is a problem. |
− | I drew up some plans based on | + | I drew up some plans based on these resources: |
* http://www.youtube.com/watch?v=7zlNimxZgqw | * http://www.youtube.com/watch?v=7zlNimxZgqw | ||
* [[File:Blast gate.doc]] | * [[File:Blast gate.doc]] | ||
+ | This is a 2.5" duct, 'cause I originally planned to use the shop vac. The hole can just be enlarged to 3" w/o other changes. For 4" or 6" gates, the plates should be enlarged, and linkages will probably need lengthening. I made a lot of paper models to get the geometry right. Someone with experience modelling moving parts with CAD could probably do the scaling more quickly. | ||
[[File:blast_gate_front.svg]] | [[File:blast_gate_front.svg]] | ||
Revision as of 16:37, 7 January 2014
Our shop needs *real* dust collection. Here lies the start of plans to rectify that.
Dust Collector
http://www.clearvuecyclones.com/cv1800-series/23-cv1800-lh-single-phase-with-filters.html
Ducting
6" sewer & drain pipe http://www.lowes.com/pd_5752-1814-S/M+06006++0600_4294765358__?productId=3134721&Ns=p_product_qty_sales_dollar%7C1&pl=1¤tURL=%3FNs%3Dp_product_qty_sales_dollar%7C1&facetInfo=
Automating this stuff
No one will use it if it doesn't turn on automatically. It *must* be automatic. I've read that using less than 3" ducts with a large 15-16" blower is a problem.
I drew up some plans based on these resources:
This is a 2.5" duct, 'cause I originally planned to use the shop vac. The hole can just be enlarged to 3" w/o other changes. For 4" or 6" gates, the plates should be enlarged, and linkages will probably need lengthening. I made a lot of paper models to get the geometry right. Someone with experience modelling moving parts with CAD could probably do the scaling more quickly.
Machines that need collection
- Table saw (needs retrofit 6" pipe inside and out, maybe 5" and an overhead 3" collector)
- Jointer
- Mitre saw (needs a shroud built)
- Bandsaw (needs front plate of drive wheel replaced with something allowing for collection)
- Belt/disk sander (probably needs a shroud for the belt, or just a better sander)
- Planer (could probably use side shrouds)
- Stationary and pedestal grinders (hot metals)
- Grinder (cold metals)
- CNC mini mill.
- Wood lathe (needs a shroud)
- Drill presses