1,524
edits
Changes
From Pumping Station One
Epilog 30w Mini 24 Laser Engraver (view source)
Revision as of 20:13, 3 July 2015
, 20:13, 3 July 2015→Top Eight
* You must stay with the job; don't walk away. Things could catch on fire, that would suck.
* You must stay with the job; don't walk away. Things could catch on fire, that would suck.
* Sometimes it's a pain to get the right driver working. http://www.thinkgeek.com/product/11c3/
* Sometimes it's a pain to get the right driver working. http://www.thinkgeek.com/product/11c3/
* Do not attempt to service the machine yourself unless you've cleared it with Elizabeth
* Do not attempt to service the machine yourself unless you've cleared it with the CNC Area Host
* Do not touch any settings in the Config menu on the machine itself
* Do not touch any settings in the Config menu on the machine itself
* Do not touch any settings in the Maint menu on the machine itself '''''except''''' you may use Maint/1/Return Home to reset the cutting head to the machine's default origin (.015" inside the top left corner as of 4/28/15)
* Do not touch any settings in the Maint menu on the machine itself '''''except''''' you may use Maint/1/Return Home to reset the cutting head to the machine's default origin (.015" inside the top left corner as of 4/28/15)
