Difference between revisions of "User:Mct/locker"
< User:Mct
Jump to navigation
Jump to search
m (→cloth) |
m (→stock metal) |
||
Line 307: | Line 307: | ||
|- | |- | ||
| 3 | | 3 | ||
− | | 11 | + | | 11" |
| 3/8" OD round | | 3/8" OD round | ||
| zinc-plated steel | | zinc-plated steel |
Revision as of 06:19, 16 April 2017
no. 16
consumables
abrasives
count | grit | size |
---|---|---|
5 | 240 | 9" x 11" |
5 | 500 | 9" x 11" |
5 | 1000 | 9" x 11" |
5 | 2500 | 9" x 11" |
fasteners
count | diameter | pitch | length | shoulder |
---|---|---|---|---|
2 | 1/4" | 20 | 1.25" | 1/2" |
count | diameter | pitch |
---|---|---|
1 | 1/4" | 20 |
count | inside diameter | outside diameter |
---|---|---|
4 | 1/4" | 5/8" |
count | size |
---|---|
1 box | #6, 1" |
many | assorted |
count | contact type | thread | length |
---|---|---|---|
many | flat | 6-32 | 1/8" |
misc
quantity | desc | state |
---|---|---|
2 fl oz | CA accelerator | unopened |
5g | super glue | opened |
2 fl oz | cold bluing | unopened |
count | desc | state |
---|---|---|
1 pair | safety glasses | no damage |
9 pair | heavy-duty nitrile gloves | unused |
writing
count | desc |
---|---|
1 | king size sharpie |
1 | fine rollerball |
3 (R, B, K) | thin permanent marker |
1 | mechanical pencil |
count | desc |
---|---|
1 sheaf | quad graph paper |
cloth
count | desc | state |
---|---|---|
2 | terry towel | new |
1 | terry towel | dirty |
1 | terry towel | dirty, torn, with chamfer shards |
1 pair | socks | new |
1 pair | socks | dirty |
8 pads | 0000 (super fine) steel wool | unused |
cutters
count | size | length | shank | flutes | desc | state |
---|---|---|---|---|---|---|
1 | 1/4" | 1" | 1/4" | 2 | carbide end mill | new |
1 | 1/4" | 1" | 1/4" | 2 | carbide end mill | used |
count | size | length | shank | flutes | desc | state |
---|---|---|---|---|---|---|
1 | 1/2" | 13/16" | 1/2" | 2 | TiN coated HSS double end mill | new |
1 | 1/2" | 13/16" | 1/2" | 2 | HSS double end mill | used |
1 | 1/4" | 1/2" | 3/8" | 2 | HSS double end mill for Al | used |
count | type | thread | state |
---|---|---|---|
1 | starting | 6-32 | used |
1 | bottoming | 6-32 | used |
count | desc | state |
---|---|---|
1 | 2fl 90 deg 1/4" carbide chamfer mill | used |
1 | 6fl 90 deg 1" countersink bit | new |
stock metal
count | length | cross-section | material |
---|---|---|---|
3 | 11" | 3/8" OD round | zinc-plated steel |
1 | 5" | 1.625" OD round | 6061 Al |
1 | 4.25" | 4cm x 4cm | 6061 Al |
1 | 4" | 3/4" x 3" | 6061 Al |
3 | 10" | 1/4" OD round | Al |
1 | 7" | 3/8" hex | 6061 Al |
count | length | cross-section | wall | material |
---|---|---|---|---|
1 | 8.25" | 1.5" x 1.5" square | 1/8" | 6061 Al |
1 | 6.25" | 1.5" OD round | 0.05" | 6061 Al |
count | desc | material |
---|---|---|
several | street sweeper bristle | 8" avg length; unrusted to rusty |
1 | small cuboid | 6061 Al |
1 | small cuboid | 4130 steel |
1 | 1" x 1.625" OD disc | 6061 Al |
tools
count | desc | state |
---|---|---|
1 | 12-piece needle file set | unused |
1 | 0.2" edge finder | no wear |
4 (nos. 6, 8, 10, 12) | drill & countersink combo bits | no wear |
1 | hex key for countersink bits | no wear |
1 | 6", 150mm; 0.0005", 0.01mm calipers | no wear |
1 | carbide-tip scriber | no wear |
1 | 10ft tape measure | used |
1 | indicator mount with 3/8" ID hole | modified |
1 | magnetic base | no wear |
count | desc |
---|---|
1 | pen tube |
1 | 1.5" OD, 1" brass cylinder |
1 | ~12" acrylic straight edge |
4 | shelf supports |
1 | 5/16"-18, 5/8" OD adapter for indicator arm |