Evenheat 810 Kiln
Jump to navigation
Jump to search
[[Category:Arts - Graphic Arts and Textiles]]
Owner/Loaner | PS:One |
---|---|
Serial Number | 38008 |
Make/Model | Evenheat 810 |
Arrival Date | 2010 |
Usability | Yes |
Contact | Eric Stein |
Where | Arts - Graphic Arts and Textiles |
Authorization Needed | yes |
Hackable | no |
Estimated Value | $865 |
Host Area | Arts - Graphic Arts and Textiles |
History
On 1/28/2013 this was tested to at least power up and create heat.
3/3/2014. Inspect and test all mechanical and electrical components.
Remove upper switch, disassemble, clean contacts, reassemble and reinstall.
All components appear to works as intended.
Heating Profile
On 3/3/2014 I ran the kiln using a PID temperature controller set to 2200f.
Room temp to 500f. 7 min.
Room temp to 1000f. 17 min.
Room temp to 1500f. 40 min.
Room temp to 2000f. 95 min.