Cubify Sense 3d Scanner
From Pumping Station One
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Owner/Loaner | PS:One |
---|---|
Serial Number | 1405210468 |
Make/Model | Sense |
Arrival Date | 2014 |
Usability | yes |
Contact | CNC Area Host, or Will Garza, or Ray Doeksen |
Where | On top of CubePro Trio 3D printer |
Authorization Needed | no |
Hackable | no |
Estimated Value | $400 |
Host Area | CNC |
The 3Dsystems account is registered to the info@ email and the password can be found in the ticketing system.
Getting Started with Sense Software
- Download the sense software to your laptop (PC/Mac) - link below
- Install the software
- When prompted input registration code (taped to the side of the scanner)
- Plug in the scanner into a USB port
- Let Windows install the drivers - when complete Device Manager should show a USB Device > PrimeSense > PrimeSense Carmine 1.09
- Follow on screen instructions to begin scanning
Software
Sense 3D Scanner (native)
- https://www.3dsystems.com/shop/support/sense/downloads
- SenseSetup_v2.2
- Seems to work well, simple interface
ReconstructMe
- http://reconstructme.net/
- ReconstructMe_64bit_2.5.1034
- Go into settings and select the Carmine Scanner
- Somewhat slow
Skanect
- https://skanect.occipital.com/download/
- Skanect-1.9.1-win64.exe
- Recording wasn't starting without a little bit of start delay
- Fast with lots of options