1,555
edits
Changes
Jump to navigation
Jump to search
Line 3:
Line 3: − Drops at sawstop, and multiple at each table row.+ − + − + − − 3. Since we are doing electrical we also need addition outlets on the opposite side of the ceiling in front of the the projection wall and white boards. I would suggest additional 3 outlet boxes spaced the same as the surface wiring to replace the yellow extension cord. − TBD remainder on walls. − 3 phase for the beer brewing fermenter system. + + + − + + − Power for eventual hot metal and glass room?
no edit summary
==Woodshop==
==Woodshop==
Reel drops at sawstop, and multiple at each table row.
Sawstop + dust manager need more power.
Sawstop + dust manager need more power.
==Electronics==
==Electronics==
1. We need 2 drops of three phase 50 Amp in the metal shop. Any where along the long wall.
1. The ceiling extension cord in the electronics lab needs to be replaced with surface wiring. Three boxes spaced where the retractable drops are located. Do reel drops.
2. The ceiling extension cord in the electronics lab needs to be replaced with surface wiring. Three boxes spaced where the retractable drops are located.
2. Since we are doing electrical we also need addition outlets on the opposite side of the ceiling in front of the the projection wall and white boards. I would suggest additional 3 outlet boxes spaced the same as the surface wiring to replace the yellow extension cord. Same drops as the other part of the room.
==Kitchen==
==Kitchen==
GHCI outlet by sink.
GHCI outlet by sink.
Fix bent electrical drop from ceiling.
Fix bent electrical drop from ceiling.
==Lounge==
==Lounge==
Fix exposed wiring, which there is now more of.
Fix exposed wiring, which there is now more of.
Outlets as needed to solve the extension cords issue.
==Metal Shop==
==Metal Shop==
The circuit that goes along the shop side of the shop (wood, metal) with the really long conduit, is one circuit. It trips sometimes if people are using everything.
The circuit that goes along the shop side of the shop (wood, metal) with the really long conduit, is one circuit. It trips sometimes if people are using everything.
Run a new circuit from the panel inside the shop, run power off of there. Shorten the wood shop circuit so it doesn't extend to metal.
==General Shop Area==
==General Shop Area==
Fix drops that are not on stiff supports or use the wrong kind of conduit.
Fix drops that are not on stiff supports or use the wrong kind of conduit. Where there are no drops, we should add some.
Everything should be metered to avoid having 220 where it's not supposed to be 220 and vice versa.
Fix breaker boxes to be properly screwed shut.
Fix breaker boxes to be properly screwed shut.
Map breakers.
Map breakers.