Changes

== Maintenance ==

== Maintenance ==

Print bed leveled and fully calibrated on 2/12/15 by Will Garza

Print bed leveled and fully calibrated on 2/12/15 by Will Garza

Instructions provided by Cubify:

Instructions provided by Cubify:

If the cartridge is not jammed, move forward with checking the print jet

If the cartridge is not jammed, move forward with checking the print jet

Check the print jet - Go to the control jets function on the touch screen to test the print jet. Choose the corresponding print jet by selecting A, B, or C. Set the temperature to 260C. Once the actual temperature meets 260C, turn the RPM up to 4.0. This will start the gears which should make the machine start extruding material. Follow steps below depending on what happens.

Check the print jet - Go to the control jets function on the touch screen to test the print jet. Choose the corresponding print jet by selecting A, B, or C. Set the temperature to 260C. Once the actual temperature meets 260C, turn the RPM up to 4.0. This will start the gears which should make the machine start extruding material. Follow steps below depending on what happens.

Filament Flow Error - No material extruding - no clicking noise present - It is possible that the material is not properly loaded and the gears are not catching the filament. Please follow the link below for steps on reloading the filament.  

Filament Flow Error - No material extruding - no clicking noise present - It is possible that the material is not properly loaded and the gears are not catching the filament. Please follow the link below for steps on reloading the filament.  

No Filament Error Present - Material is extruding correctly - This confirms that the print jet is functioning correctly. The error message received during the print is related to settings. If the Z gap is to tight and the plate is not level, the material has nowhere to go and will throw a filament flow error. Please refer to the user guide for setting the Z gap and leveling the print Pad.

No Filament Error Present - Material is extruding correctly - This confirms that the print jet is functioning correctly. The error message received during the print is related to settings. If the Z gap is to tight and the plate is not level, the material has nowhere to go and will throw a filament flow error. Please refer to the user guide for setting the Z gap and leveling the print Pad.