Difference between revisions of "AIM Kiln 1413"
Jump to navigation
Jump to search
(→Safety) |
|||
Line 21: | Line 21: | ||
Authorization is required | Authorization is required | ||
− | ==Safety== | + | ==Safety== |
+ | Use of the kiln for ceramic does not require special PPE. | ||
+ | |||
+ | Clear the surrounding area, at least one foot radios, of combustible material, wood, paper and especially aerosol containers. | ||
+ | |||
+ | Make sure ceramic wears are cooled below 100 degrees Fahrenheit before handling. | ||
+ | |||
+ | Do not fire green-wear (raw, un-fired clay) unless completely dry. | ||
==Manuals== | ==Manuals== | ||
https://www.aimkiln.com/manuals | https://www.aimkiln.com/manuals |
Revision as of 00:34, 16 September 2020
Owner/Loaner | PS1 |
---|---|
Serial Number | ACO7055 |
Make/Model | 1413/2TF |
Arrival Date | 10/2018 |
Usability | yes |
Contact | [email protected] |
Where | Small Metals |
Authorization Needed | yes |
Hackable | no |
Estimated Value | ~$600-900 |
Host Area | Small Metals |
Status
Kiln works as of 9/15/20
Authorization
Authorization is required
Safety
Use of the kiln for ceramic does not require special PPE.
Clear the surrounding area, at least one foot radios, of combustible material, wood, paper and especially aerosol containers.
Make sure ceramic wears are cooled below 100 degrees Fahrenheit before handling.
Do not fire green-wear (raw, un-fired clay) unless completely dry.