718
edits
Changes
From Pumping Station One
BiosensorArray - Data Logging (view source)
Revision as of 19:00, 11 April 2018
, 19:00, 11 April 2018add category
[[Category:Biosensor Array]]
====== This page is part of the [[Biosensor Array]] Project ======
====== This page is part of the [[Biosensor Array]] Project ======
== Onboard Storage ==
== Onboard Storage ==
Biosensor data stream should be stored in a non-volitile manner on the data aggregator board attached to the body. Ideally, the biosensor array will stream data wirelessly to a smart phone or computer, but this should not be required to ensure operational flexibility. Therefore, a moderate amount of on board storage is required.
Biosensor data stream should be stored in a non-volitile manner on the data aggregator board attached to the body. Ideally, the biosensor array will stream data wirelessly to a smart phone or computer, but this should not be required to ensure operational flexibility. Therefore, a moderate amount of on board storage is required.
=== EEPROM ===
=== EEPROM ===
* Implementations:
* Implementations:
**[http://www.sparkfun.com/products/525 Sparkfun i2c EEPROM chip]
** [http://www.sparkfun.com/products/525 Sparkfun i2c EEPROM chip]
**[http://us.element-14.com/microchip/25aa1024-i-p/ic-eeprom-1mbit-serial-20mhz-dip/dp/89H3144 element14 - Microchip SPI EEPROM]
** [http://us.element-14.com/microchip/25aa1024-i-p/ic-eeprom-1mbit-serial-20mhz-dip/dp/89H3144 element14 - Microchip SPI EEPROM]
=== Flash Memory (SD, microSD, etc) ===
=== Flash Memory (SD, microSD, etc) ===
== Related ==
== Related ==
* [[Biosensor Array Mother Arduino | Mother Arduino]]
* [[Biosensor Array Mother Arduino|Mother Arduino]]
