615
edits
Changes
From Pumping Station One
Biosensor Array Body Temperature (view source)
Revision as of 14:18, 22 May 2011
, 14:18, 22 May 2011→Version 2.0
** 1-wire library doesn't interfere with the present, interrupt driven, main Arduino sketch structure.
** 1-wire library doesn't interfere with the present, interrupt driven, main Arduino sketch structure.
* Without a bare PCB requiring an enclosure, we have been able to shrink the sensor size and mount it, directly, onto the end of a multi-conductor cable. Heatshrink tubing is used to seal the connecton between the sensor and the cable.
* Without a bare PCB requiring an enclosure, we have been able to shrink the sensor size and mount it, directly, onto the end of a multi-conductor cable. Heatshrink tubing is used to seal the connecton between the sensor and the cable.
* The other end of the sensor cable is connected to a four conductor, 3.5mm,
* The other end of the sensor cable is connected to a four conductor, 3.5mm, audio plug which connects to a female, four conductor, panel mounted 3.5mm audio socket on the base biosensor array unit.
===Version 1.0===
===Version 1.0===
