Difference between revisions of "Boice Crane Drill Press"
Speedebikes (talk | contribs) |
|||
Line 11: | Line 11: | ||
|hackable=no | |hackable=no | ||
|value=$600}} | |value=$600}} | ||
+ | |||
+ | |||
+ | == Specifications == | ||
+ | |||
+ | == Auth/Use Notes == | ||
+ | |||
+ | These notes are for reference after authorization by a person. | ||
+ | |||
+ | Only use drills and accessories with correct shank taper and tang | ||
+ | |||
+ | Work piece needs secure mounting due to spindle's high torque | ||
+ | |||
+ | No through hole (table designed for coolant), must use vise or spoil layer | ||
+ | |||
+ | No quill stop, must set table or head height to prevent drilling into table | ||
+ | |||
+ | Don't force gear selectors, hand turn spindle as needed to align gears | ||
+ | |||
+ | Gears reverse spindle, must turn power switch to appropriate side for correct spindle rotation direction | ||
+ | |||
+ | Power switch has two speeds to each side | ||
+ | |||
+ | Drill shanks must be firmly seated in taper | ||
+ | |||
+ | To remove drill, align slots in spindle, insert wedge, grasp drill, tap wedge with hammer | ||
+ | |||
+ | == To-Do == | ||
+ | |||
+ | Clean drill shanks | ||
+ | |||
+ | Mill pocketed vise jaw flat | ||
+ | |||
+ | More clamps matching table T-slots | ||
+ | |||
+ | Improve sketchy quill return mechanism | ||
+ | |||
+ | Adjustable quill stop | ||
+ | |||
+ | Coolant system | ||
+ | |||
+ | == Maintenance == | ||
+ | |||
+ | == Equipment == | ||
+ | |||
+ | == References == | ||
+ | |||
+ | == List of Currently Authorized Users == | ||
+ | {| class="wikitable" border="1" | ||
+ | ! Qualified Member | ||
+ | ! Trained By | ||
+ | !Date Trained | ||
+ | |- | ||
+ | |Dean Anderson | ||
+ | |Machine Shop Host Cred | ||
+ | | | ||
+ | |- | ||
+ | |Everett Wilson | ||
+ | |Dean Anderson | ||
+ | | | ||
+ | |- | ||
+ | | Todd Allen | ||
+ | | Dean Anderson | ||
+ | |9/15/2015 | ||
+ | |-} | ||
+ | |||
+ | [[Category:Metalworking]] | ||
+ | [[Category:Coldmetals]] |
Revision as of 14:36, 17 September 2015
Specifications
Auth/Use Notes
These notes are for reference after authorization by a person.
Only use drills and accessories with correct shank taper and tang
Work piece needs secure mounting due to spindle's high torque
No through hole (table designed for coolant), must use vise or spoil layer
No quill stop, must set table or head height to prevent drilling into table
Don't force gear selectors, hand turn spindle as needed to align gears
Gears reverse spindle, must turn power switch to appropriate side for correct spindle rotation direction
Power switch has two speeds to each side
Drill shanks must be firmly seated in taper
To remove drill, align slots in spindle, insert wedge, grasp drill, tap wedge with hammer
To-Do
Clean drill shanks
Mill pocketed vise jaw flat
More clamps matching table T-slots
Improve sketchy quill return mechanism
Adjustable quill stop
Coolant system
Maintenance
Equipment
References
List of Currently Authorized Users
Qualified Member | Trained By | Date Trained |
---|---|---|
Dean Anderson | Machine Shop Host Cred | |
Everett Wilson | Dean Anderson | |
Todd Allen | Dean Anderson | 9/15/2015 |