Domain Admins
586
edits
Changes
Jump to navigation
Jump to search
Line 43:
Line 43: + + − − The only big electrical task remaining is to permanently hard-wire its power supply.
→What works so far
== What works so far ==
== What works so far ==
Almost everything. The table and quill move as expected using the Heidenhain controller and joystick, including the handwheel. We can create and run simple programs using the Heidenhain conversational programming mode. We have switched the machine over to ISO G-code, and have been able to run programs with this. We have changed the communication parameters to FE mode, which permits transferring programs to/from the machine's memory, as well as drip feeding programs directly.
Almost everything. The table and quill move as expected using the Heidenhain controller and joystick, including the handwheel. We can create and run simple programs using the Heidenhain conversational programming mode. We have switched the machine over to ISO G-code, and have been able to run programs with this. We have changed the communication parameters to FE mode, which permits transferring programs to/from the machine's memory, as well as drip feeding programs directly.
The Bijur mist coolant system works when controlled by 120v. We didn't try it with the mill's controller because it isn't running at this time. The output, with the adjustments we tried, was more like a spray than a mist. Unsure if this is correct or perhaps the jet needs to be cleaned. The sight tube for the coolant level is deceptive. The tube should be cleaned.
We need to reassemble the machine and make many adjustments as well as establish a CAD/CAM process on a external computer.
We need to reassemble the machine and make many adjustments as well as establish a CAD/CAM process on a external computer.
The only big mechanical task remaining is to fix the bent ball screw cover.
The only big mechanical task remaining is to fix the bent ball screw cover.
== Open Issues ==
== Open Issues ==