Changes

'''Mechanical'''

'''Mechanical'''

A replacement cover for the variable speed drive is partially installed. We need to remove the cover and replace two alignment pins, then adjust the Reeves drive.

The head has some unexpected noise. Not from the motor, probably from the Reeves drive.  The Reeves drive needs to be adjusted.

A draw bar should arrive from Kurt around 4/21. It will need to be machined to length and drilled for a pin.

Install the Kurt power draw bar and machine the draw bar to size.

 

Install the Kurt power draw bar.  

X, Y and Z limit switches need to be adjusted.

X, Y and Z limit switches need to be adjusted.