Changes

== Supplies ==

== Supplies ==

Supplies are generally not provided. There are some PS1-owned bits in the drawer for the ShopBot, there is often some common-use filament available for the TAZ3, AO-100 or Replicator 3D printers, but you may also used your own if you want to be confident that you'll have enough high-quality filament for your project. Filament can be purchased at MicroCenter and other retailers for about $20 per spool. Filament can be purchased for the Cube printer for about $100 per cartridge.  

Supplies are generally not provided. There are some PS1-owned bits in the drawer for the ShopBot, but you may wish to purchase your own bits if you want to be confident that you'll have a good, sharp bit of the appropriate size for your project. If you break a shop-owned bit, please tell the area host and post a note to the wiki and Google group.

 

There is often some common-use filament available for the TAZ3, AO-100 or Replicator 3D printers, but you may also used your own if you want to be confident that you'll have enough high-quality filament for your project. Filament can be purchased at MicroCenter and other retailers for about $20 per spool. Filament can be purchased for the Cube printer for about $100 per cartridge.  

All machines, including the vinyl cutter and large format printers, should have information about their consumables listed on their respective wiki page.  

All machines, including the vinyl cutter and large format printers, should have information about their consumables listed on their respective wiki page.  

There is a donation box next to the Cube printer for filament; suggested donation for Cube filament is 30 cents per gram.  

There is a donation box next to the Cube printer for filament; suggested donation for Cube filament is 30 cents per gram.

 

== Certifications ==

== Certifications ==