Consew 287RB Industrial Sewing Machine
Revision as of 16:26, 17 August 2021 by Richard (talk | contribs) (Created page with "{{Template:EquipmentPage |image= |owner=PS:One|model=287rb |serial=|arrived= |doesitwork=yes |contact=Lydia Miller |where=Graphic Arts and Textiles |certification=yes |ha...")
Owner/Loaner | PS:One |
---|---|
Make/Model | 287rb |
Usability | yes |
Contact | Lydia Miller |
Where | Graphic Arts and Textiles |
Authorization Needed | yes |
Hackable | no |
Estimated Value | >$500 |
Host Area | Arts |
Property "Has value" (as page type) with input value ">$500" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.
Documentation
Manual: https://manualzz.com/doc/54037058/consew-287rb-manual Bobbin Winder: https://www.youtube.com/watch?v=OpicH93tcZ0 Insert Bobbin: https://www.youtube.com/watch?v=aur4-kMDu3s&list=FLjJ0tEj5of-FQYZzMHkevug&index=7
Tips
- To reverse, pull the lever down
- To change stitch length, move the lever down and tighten screw to hold the lever in place
- To change the thread, it's easiest to cut the thread from the old feed and tie the new thread to it, then run the machine for a few seconds as the thread works it way through the loops.
Troubleshooting
If you are having trouble getting the needle to properly catch on the bobbin thread, check the following:
- is the bobbin properly installed and threaded
- is the needle facing the right direction
- is the thread leading to the needle properly configured (missing some of the thread loops can result in a failure for the needle to properly catch the bobbin thread)