Removed from service. This Doall model appears to be a rebadged Wilton 5816.
−
== ==
+
−
This Doall model appears to be a rebadged Wilton 5816.
== Problems ==
== Problems ==
−
Jay Hopkins reports as of 1/14/2013 that there is wobble in the spindle and it does not drill entirely vertically. Mike Warot and Ed Bennett verified it. It walked sideways.
+
During an auth, Everett noticed significant wobble in the chuck -- enough to make it unusable. Ron Bean fixed by replacing the chuck on 5/15/15.