Line 60: |
Line 60: |
| • Curly shavings from a planer or jointer will quickly fill the drums. | | • Curly shavings from a planer or jointer will quickly fill the drums. |
| | | |
− | 1. Release the three clamps at the top of the first drum | + | <li>1. Release the three clamps at the top of the first drum </li> |
− | 2. Pull the friction fit 1 inch vacuum hose loose from the bottom of the drum | + | <li>2. Pull the friction fit 1 inch vacuum hose loose from the bottom of the drum |
− | 3. Lift the top away from the drum and carefully so as to not disconnect the large hose and “Y” connector | + | </li><li>3. Lift the top away from the drum and carefully so as to not disconnect the large hose and “Y” connector |
− | 4. Pull the drum out and lift the dust bag out. | + | </li><li>4. Pull the drum out and lift the dust bag out. |
− | 5. Tie the bag off with tape or zip tie | + | </li><li>5. Tie the bag off with tape or zip tie |
− | 6. Place new bag in drum | + | </li><li>6. Place new bag in drum |
− | 7. Be sure to replace the black rim gasket as found on the rim under the bag | + | </li><li>7. Be sure to replace the black rim gasket as found on the rim under the bag |
− | 8. Roll drum back and reconnect the top and the hose at the bottom | + | </li><li>8. Roll drum back and reconnect the top and the hose at the bottom |
− | 9. Repeat with second drum | + | </li><li>9. Repeat with second drum |
− | 10. Place bags in dumpster | + | </li><li>10. Place bags in dumpster |
| | | |
| [[File:dcdrums.jpg]] | | [[File:dcdrums.jpg]] |
Line 83: |
Line 83: |
| | | |
| Note: Always make sure to leave the red handles in the up position to ensure that the brushes return to their proper position and do not restrict the filter. | | Note: Always make sure to leave the red handles in the up position to ensure that the brushes return to their proper position and do not restrict the filter. |
− | [[File:dcfilters]] | + | [[File:dcfilters]] |
− | | |
− | | |
− | | |
| | | |
| == notes == | | == notes == |