3,430
edits
Changes
From Pumping Station One
Epilog 30w Mini 24 Laser Engraver (view source)
Revision as of 19:50, 19 July 2014
, 19:50, 19 July 2014→Air assist
* [http://www.abbeyspecialties.com/ Abbey Specialties] for acrylic in varied sizes, this company is our landlord. They are in the other half of our building and if you ask they can drop off in our shared loading dock.
* [http://www.abbeyspecialties.com/ Abbey Specialties] for acrylic in varied sizes, this company is our landlord. They are in the other half of our building and if you ask they can drop off in our shared loading dock.
== Air assist ==
Air assist is used for vector cutting to have nice traces and avoid your material to burn. However some people like to have it disabled for raster jobs. The best is to use the pressure regulator on the left of the machine to put it on/off. Don't forget to put it off when you've finished and you don't need it while doing your settings, that's just making our air compressor work too much.
Air assist is used for vector cutting to have nice traces and avoid your material to burn. However some people like to have it disabled for raster jobs. The best is to use the pressure regulator on the left of the machine to put it on/off. Don't forget to put it off when you've finished and you don't need it while doing your settings, that's just making our air compressor work too much.
