Domain Admins
27
edits
Changes
From Pumping Station One
Epilog 30w Mini 24 Laser Engraver (view source)
Revision as of 17:10, 12 September 2014
, 17:10, 12 September 2014→NEVER CUT THESE MATERIALS
* '''PTFE:''', also known as '''Teflon''' or any fluorinated polymer it will releases nasty fluorinated compounds (bad for you) and sublimate then deposit on the lenses (likely destroying them).
* '''PTFE:''', also known as '''Teflon''' or any fluorinated polymer it will releases nasty fluorinated compounds (bad for you) and sublimate then deposit on the lenses (likely destroying them).
* '''Gator foam''': foam core gets burned and eaten away compared to the top and bottom hard paper shell. Not a fantastic thing to cut, but it can be cut if watched. And the MSDS sheet says it may produce hydrogen bromide and hydrogen chloride known to degrade the optics and mechanic of the cutter
* '''Gator foam''': foam core gets burned and eaten away compared to the top and bottom hard paper shell. Not a fantastic thing to cut, but it can be cut if watched. And the MSDS sheet says it may produce hydrogen bromide and hydrogen chloride known to degrade the optics and mechanic of the cutter
* Any other plastic with "Chlor" or "Fluor" in the name, for the same reasons as PVC and PTFE above.
== '''Test for material''' ==
== '''Test for material''' ==
