Changes

| serial=SERIAL NUMBER  

| serial=SERIAL NUMBER  

| arrived=6/29/2011  

| arrived=6/29/2011  

| doesitwork=yes

| doesitwork=no

| contact=[[CNC|CNC Area Host]]  

| contact=[[CNC|CNC Area Host]]  

| where=CNC room against northwest wall

| where=CNC room against northwest wall

== Status ==

== Status ==

Epilog is operational after repairs.  

The Epilog is broken and won't be repaired anytime real soon. February 1, 2018.

Due to the Epilog being moved, there are new procedures for getting it operational. Currently, the air assist switch is dangling from a board to the left of the laser. The air assist no longer hisses as a solenoid has been installed to prevent leakage during inactivity. The vent switch is on the left of the Boss laser, labeled as such. The other switch is for the Boss chiller and should not be touched for use of the Epilog.  

Due to the Epilog being moved, there are new procedures for getting it operational. Currently, the air assist switch is dangling from a board to the left of the laser. The air assist no longer hisses as a solenoid has been installed to prevent leakage during inactivity. The vent switch is on the left of the Boss laser, labeled as such. The other switch is for the Boss chiller and should not be touched for use of the Epilog.  

# Look at the lights on the front of the SawStop. If it is green you should be OK to proceed. If its red. DO NOT CUT. IT WILL TRIGGER THE BRAKE.

# Look at the lights on the front of the SawStop. If it is green you should be OK to proceed. If its red. DO NOT CUT. IT WILL TRIGGER THE BRAKE.

You can try to sand off the char and repeat steps 1-5 or use another method to cut these pieces.  

You can try to sand off the char and repeat steps 1-5 or use another method to cut these pieces.

 

 

== Top Eight Epilog Laser Tips ==

== Top Eight Epilog Laser Tips ==

incredible box maker, with holes and text: http://www.makercase.com/

incredible box maker, with holes and text: http://www.makercase.com/

parametric pdf box creator: http://boxmaker.rahulbotics.com/

parametric pdf box creator: http://boxmaker.rahulbotics.com/

** Occasional workaround: reboot

** Occasional workaround: reboot

==== I was certified a long time ago ====

==== I was authorized a long time ago ====

You need to

You need to

# Be a Current Member

# Be a Current Member

# Have a https://members.pumpingstationone.org account

# Have a https://members.pumpingstationone.org account

# Talk to a recommended certifier, The area host, or email [email protected]

# Talk to a recommended authorizer, The area host, or email [email protected]

You may be asked to get recertified.

You may be asked to get reauthorized.

== List of Currently Certified Users ==

== List of Currently Authorized Users ==

This list is hugely incomplete because nobody was doing it. If you are authorized and remember who authorized you, go ahead and add yourself. Your non-presence on this list is not intended to insult you or your relatives.

If you are authorized and remember who authorized you, go ahead and add yourself.  

The thing that really matters is if you are enabled by virtue of being a "Epilog Laser authorized person" in your user/member account. Having your name on this list does not automatically enable you to log in on the machine that is connected to the Epilog.

The thing that really matters is if you are enabled by virtue of being a "Epilog Laser authorized person" in your user/member account.  

Having your name on this list does not automatically enable you to log in on the machine that is connected to the Epilog.

{| class="wikitable" border="1"

{| class="wikitable" border="1"

|Ray Doeksen

|Ray Doeksen

|-

|-

|[[User:skynaya|Skylar Nova]]

|[[User:skynaya|Sky Nova]]

|Ray Doeksen

|Ray Doeksen

|-

|-

|Andrew Wingate

|Andrew Wingate

|Burton Kent

|Burton Kent

|}

|}