289
edits
Changes
From Pumping Station One
Epilog 30w Mini 24 Laser Engraver (view source)
Revision as of 05:46, 21 September 2011
, 05:46, 21 September 2011→Safe Materials: repeating warning about vinyl, as some folks might not be thinking about PVC when they are at the fabric store.
**Depron foam: Used a lot for hobby, RC aircraft, architectural models, and toys. 1/4" cuts nicely, with a smooth edge. Must be constantly monitored when cutting.
**Depron foam: Used a lot for hobby, RC aircraft, architectural models, and toys. 1/4" cuts nicely, with a smooth edge. Must be constantly monitored when cutting.
**Gator foam: foam core gets burned and eaten away compared to the top and bottom hard paper shell. Not a fantastic thing to cut, but it can be cut if watched.
**Gator foam: foam core gets burned and eaten away compared to the top and bottom hard paper shell. Not a fantastic thing to cut, but it can be cut if watched.
**Cloth (leather, suede, felt, hemp, cotton) They all cut well. Leather is very hard to cut, but can be if it's thinner than a belt (call it 1/8")
**Cloth (leather, suede, felt, hemp, cotton, polyester, but NEVER vinyl or pleather-- see above) They all cut well. Leather is very hard to cut, but can be if it's thinner than a belt (call it 1/8")
**Magnetic Sheet material cuts beautifully
**Magnetic Sheet material cuts beautifully
**NON-CHLORINE containing rubber is fine for cutting.
**NON-CHLORINE containing rubber is fine for cutting.
