Domain Admins
120
edits
Changes
From Pumping Station One
Epilog 30w Mini 24 Laser Engraver (view source)
Revision as of 01:55, 17 July 2014
, 01:55, 17 July 2014→NEVER CUT THESE MATERIALS
* '''Coated Carbon Fiber:''' Again, it's a mix of two materials. Thin carbon fiber mat can be cut, with some fraying. However, once coated with epoxy it will emit noxious fumes.
* '''Coated Carbon Fiber:''' Again, it's a mix of two materials. Thin carbon fiber mat can be cut, with some fraying. However, once coated with epoxy it will emit noxious fumes.
* Silhouette '''magnet paper''' (sold by Inventables by example): it likely contains chlorine. Emits HCl and nasty chlorinated compounds when cut! Don't ever cut this material as it will ruin the optics, cause the metal of the machine to corrode, and ruin the motion control system.
* Silhouette '''magnet paper''' (sold by Inventables by example): it likely contains chlorine. Emits HCl and nasty chlorinated compounds when cut! Don't ever cut this material as it will ruin the optics, cause the metal of the machine to corrode, and ruin the motion control system.
== '''Test for material''' ==
Some people came up with an easy protocol to help identify unknown polymers: [http://www.nycresistor.com/2008/08/28/how-to-identify-polymers-with-burnination/ Nyc Resistor - how to identify polymers with burnination]. We don't know how reliable it is. And we can't but recommend to do that under good ventilation (outside?)
== Safe Materials ==
== Safe Materials ==
