Changes

** Cloth (leather, suede, felt, hemp, cotton, polyester, but NEVER vinyl or pleather-- see above) They all cut well. Leather is very hard to cut, but can be if it's thinner than a belt (call it 1/8")

** Cloth (leather, suede, felt, hemp, cotton, polyester, but NEVER vinyl or pleather-- see above) They all cut well. Leather is very hard to cut, but can be if it's thinner than a belt (call it 1/8")

** Magnetic Sheet material cuts beautifully (make SURE it does NOT contain chlorine, see above)

** Magnetic Sheet material cuts beautifully (make SURE it does NOT contain chlorine, see above)

** NON-CHLORINE containing rubber is fine for cutting.

** NON-CHLORINE containing rubber is fine for cutting. Natural rubber engraves but leaves a dark sticky residue that doesn't affect stamps if the piece is engraved deeply enough.

** Carbon fiber mats/weave that has not yet had epoxy applied can be cut, very slowly. You must not cut carbon fiber that has been coated!!

** Carbon fiber mats/weave that has not yet had epoxy applied can be cut, very slowly. You must not cut carbon fiber that has been coated!!

* Etching: all the above can be etched, in some cases very deeply. In addition, you can etch:

* Etching: all the above can be etched, in some cases very deeply. In addition, you can etch: