Changes

== Air assist ==

== Air assist ==

Air assist is used for vector cutting to have nice traces and avoid your material to burn. However some people like to have it disabled for raster jobs. The best is to use the pressure regulator on the left of the machine to put it on/off. Don't forget to put it off when you've finished and you don't need it while doing your settings, that's just making our air compressor work too much.

Air assist is used for vector cutting to have nice traces and avoid your material to burn. However some people like to have it disabled for raster jobs. The best is to use the pressure regulator on the left of the machine to put it on/off. Don't forget to put it off when you've finished and you don't need it while doing your settings, that's just making our air compressor work too much. The pressure regulator has no adjustable settings. It is either on or off.

If you hear a hiss behind the machine, it's that the valve is closed and that ''Air assist will not work'''… You have to stop the job and then:

If you hear a hiss behind the machine, it's that the valve is closed and that ''Air assist will not work'''… You have to stop the job and then: