Domain Admins
164
edits
Changes
Jump to navigation
Jump to search
Line 4:
Line 4: − + − + Line 16:
Line 16: − * Now: as of 12/24/2016 Broken, displays the error "Disabled: x axis". Due to winter holidays, repair has been delayed. Hopefully will be updated on Jan 3rd. + − + + + Line 84:
Line 86: − + − +
Epilog 30w Mini 24 Laser Engraver (view source)
Revision as of 01:43, 25 January 2017
, 01:43, 25 January 2017various updates to location as well as status
| serial=SERIAL NUMBER
| serial=SERIAL NUMBER
| arrived=6/29/2011
| arrived=6/29/2011
| doesitwork=no
| doesitwork=yes
| contact=[[CNC|CNC Area Host]]
| contact=[[CNC|CNC Area Host]]
| where=Main shop floor, just outside kitchen
| where=CNC room against northwest wall
| certification=yes
| certification=yes
| hackable=no
| hackable=no
== Status ==
== Status ==
Epilog is operational after repairs.
The Epilog uses the inline exhaust fan through the roof, the switch for that is wired into a box on an orange extension cord; the fume extractor is not currently being used with the laser. You must use air assist (compressed air) and the exhaust fan whenever you use the laser.
Due to the Epilog being moved, there are new procedures for getting it operational. Currently, the air assist switch is dangling from a board to the left of the laser. The air assist no longer hisses as a solenoid has been installed to prevent leakage during inactivity. The vent switch is on the left of the Boss laser, labeled as such. The other switch is for the Boss chiller and should not be touched for use of the Epilog.
<s>The Epilog uses the inline exhaust fan through the roof, the switch for that is wired into a box on an orange extension cord; the fume extractor is not currently being used with the laser. You must use air assist (compressed air) and the exhaust fan whenever you use the laser.<s> This information is now outdated and will be revised as the CNC room is finalized. [[User:Skynaya|Skynaya]] ([[User talk:Skynaya|talk]]) 19:42, 24 January 2017 (CST)
[[Epilog/Epilog service notes]] - please note any service, repairs, or adjustments you make to the machine.
[[Epilog/Epilog service notes]] - please note any service, repairs, or adjustments you make to the machine.
== Ventilation ==
== Ventilation ==
'''Always''' turn on the exhaust fan using the switch located in the silver box to the left of the machine.
'''Always''' turn on the exhaust fan using the switch located in the silver box to the left of the Boss laser, labeled "VENT".
== Air assist ==
== Air assist ==
Turn on the air assist by turning the silver knob on the regulator located on the red bracket attached to the wall behind the machine. The pressure regulator has no adjustable settings. It is either on or off.
Turn on the air assist by flipping the switch dangling from the board behind the laser. (This need to be updated when the laser installation is complete [[User:Skynaya|Skynaya]] ([[User talk:Skynaya|talk]]) 19:42, 24 January 2017 (CST) )
Air assist is used for vector cutting to have nice traces and avoid your material to burn. However some people like to have it disabled for raster jobs.
Air assist is used for vector cutting to have nice traces and avoid your material to burn. However some people like to have it disabled for raster jobs.