Changes

Due to the Epilog being moved, there are new procedures for getting it operational. Currently, the air assist switch is dangling from a board to the left of the laser. The air assist no longer hisses as a solenoid has been installed to prevent leakage during inactivity. The vent switch is on the left of the Boss laser, labeled as such. The other switch is for the Boss chiller and should not be touched for use of the Epilog.  

Due to the Epilog being moved, there are new procedures for getting it operational. Currently, the air assist switch is dangling from a board to the left of the laser. The air assist no longer hisses as a solenoid has been installed to prevent leakage during inactivity. The vent switch is on the left of the Boss laser, labeled as such. The other switch is for the Boss chiller and should not be touched for use of the Epilog.  

<s>The Epilog uses the inline exhaust fan through the roof, the switch for that is wired into a box on an orange extension cord; the fume extractor is not currently being used with the laser. You must use air assist (compressed air) and the exhaust fan whenever you use the laser.<s> This information is now outdated and will be revised as the CNC room is finalized. [[User:Skynaya|Skynaya]] ([[User talk:Skynaya|talk]]) 19:42, 24 January 2017 (CST)

<s>The Epilog uses the inline exhaust fan through the roof, the switch for that is wired into a box on an orange extension cord; the fume extractor is not currently being used with the laser. You must use air assist (compressed air) and the exhaust fan whenever you use the laser.</s> This information is now outdated and will be revised as the CNC room is finalized. [[User:Skynaya|Skynaya]] ([[User talk:Skynaya|talk]]) 19:42, 24 January 2017 (CST)

[[Epilog/Epilog service notes]] - please note any service, repairs, or adjustments you make to the machine.

[[Epilog/Epilog service notes]] - please note any service, repairs, or adjustments you make to the machine.