Difference between revisions of "Epilog Laser settings"
Jump to navigation
Jump to search
(settings to engrave acrylic to 1mm depth) |
|||
Line 42: | Line 42: | ||
| 500 | | 500 | ||
|- | |- | ||
− | | | + | | Maple (engrave) |
| 35 | | 35 | ||
| 100 | | 100 | ||
Line 50: | Line 50: | ||
| 100 | | 100 | ||
| 5000 | | 5000 | ||
+ | |- | ||
+ | | Cork (engrave) | ||
+ | | 45 | ||
+ | | 100 | ||
+ | |- | ||
+ | | 1/8" PETG (cut) put wet newspaper on top to prevent charring | ||
+ | | 35 3 passes | ||
+ | | 100 | ||
+ | | 500 | ||
+ | |- | ||
+ | | PETG (engrave) | ||
+ | | 100 | ||
+ | | 60 | ||
|- | |- | ||
| Acrylic (1mm engrave depth with crisp edges) | | Acrylic (1mm engrave depth with crisp edges) | ||
| Regular settings for Acrylic and print 3 copies | | Regular settings for Acrylic and print 3 copies | ||
|} | |} |
Revision as of 04:17, 8 February 2012
Settings for various materials
Material | Speed | Power | Frequency |
---|---|---|---|
Cardstock (perforate) | 80 | 45 | 175 |
Corrugated Cardboard (cut) | 25 | 50 | 500 |
Corrugated Cardboard (etch) | 100 | 50 | |
1/4" Aspen (cut) | 7 | 100 | 500 |
1/4" mdf (cut) | 7 | 100 | 500 |
1/8" birch plywood (cut) | 15 | 100 | 500 |
1/4" Maple (cut) | 6 | 95 | 500 |
Maple (engrave) | 35 | 100 | |
1/4" mirror back acrylic (cutting from back) | 10 | 100 | 5000 |
Cork (engrave) | 45 | 100 | |
1/8" PETG (cut) put wet newspaper on top to prevent charring | 35 3 passes | 100 | 500 |
PETG (engrave) | 100 | 60 | |
Acrylic (1mm engrave depth with crisp edges) | Regular settings for Acrylic and print 3 copies |