1,238
edits
Changes
Jump to navigation
Jump to search
Line 6:
Line 6: − + + + + + + + + + +
no edit summary
|model = BeagleBone Black
|model = BeagleBone Black
|arrived = 2016-04-05
|arrived = 2016-04-05
|doesitwork = yes
|doesitwork = no
|contact = Ron Olson
|contact = Ron Olson
|where = Screwed to the front door
|where = Screwed to the front door
|value = ~$100
|value = ~$100
}}
}}
= Current Status =
11/28/16 - BBB is not responsive and appears to be defunct. Power supply has been measured and is supplying 5.1V. All items were unplugged and restarting the BBB was unsuccessful.
= Next Steps =
*Check voltage pads on the BBB to see if maybe there is a bad connection at the connector.
*Remove BBB from the door and fasten to the wall by the door latch
*Put USB wire through the door frame and place RFID in a static location on the wall outside. Must be placed inside a waterproof container - consider potting.
*Run some conduit to an outlet above the doorway so RFID gets constant power. Can be taken from light switch that always remains on for the light in the foyer or by the light itself.
= Functions =
= Functions =