1,238
edits
Changes
Jump to navigation
Jump to search
Line 17:
Line 17: − +
→Next Steps
= Next Steps =
= Next Steps =
*Add enclosure and equipment label
*Add enclosure and equipment label
*Check voltage pads on the BBB to see if maybe there is a bad connection at the connector.
*Check voltage pads on the BBB to see if maybe there is a bad connection at the power connector.
*Remove BBB from the door and fasten to the wall by the door latch
*Remove BBB from the door and fasten to the wall by the door latch
*Put USB wire through the door frame and place RFID in a static location on the wall outside. Must be placed inside a waterproof container - consider potting.
*Put USB wire through the door frame and place RFID in a static location on the wall outside. Must be placed inside a waterproof container - consider potting.