Difference between revisions of "Gravity Iron"
Jump to navigation
Jump to search
Jleonardson (talk | contribs) |
Jleonardson (talk | contribs) |
||
Line 1: | Line 1: | ||
{{Template:EquipmentPage | {{Template:EquipmentPage | ||
− | |image= | + | |image=Gravity_iron.jpg |
|owner=PS:One|model=20U Industrial | |owner=PS:One|model=20U Industrial | ||
|serial=181133|arrived=2023 | |serial=181133|arrived=2023 |
Revision as of 22:51, 1 September 2023
Owner/Loaner | PS:One |
---|---|
Serial Number | 181133 |
Make/Model | 20U Industrial |
Arrival Date | 2023 |
Usability | yes |
Contact | Lydia Miller |
Where | Arts |
Authorization Needed | no |
Hackable | no |
Estimated Value | ~$120 |
Host Area | Arts |
Gravity Iron Model Silver ES-85AF
Status
Ready. On the pressing board. When not in use unplug the iron and rest it horizontally on its silicon rest.
Rules
- The water tank needs to hang more than 5 ft. above the ironing surface
- Plug in to a power socket and turn on the power switch
- Important: Do not place the iron upright when not in use
- Set the Temperature Control to 4 and wait 5 minutes
- Set the temperature; 1, 2: Pre-heating 3: Silk (low) 4: Cotton and wool (medium) 5: Other thick clothes (high)
- Turn the water tank valve counterclockwise and press the steam switch
- Press the steam switch for 1–2 seconds and pause for 3–4 seconds. Do not hold the steam switch longer than 5–6 seconds
- The iron shoe can be attached to prevent glossed fabric
- Turn off power and unplug the iron when not in use
- Close the water tank valve and press the steam button relieve pressure
- Allow 30 minutes at least for the iron to cool
- Keep flammable materials away from the iron while it in use (it is over 200˚C)