Changes

<li>Insert the handle through the frame just far enough to hold the die rack at the right height, as shown below.</li>

<li>Insert the handle through the frame just far enough to hold the die rack at the right height, as shown below.</li>

<li>Insert the handle through the center die using the key stock to center the handle and center die.</li>

<li>Insert the handle through the center die using the key stock to center the handle and center die.</li>

<li>Use the 5/32” Allen wrench to tighten the center die set screws. The set screws should be snug but not overtightened.</li>

<li>Use the 5/32” Allen wrench to tighten the center die set screws. '''The set screws should be snug but not overtightened.'''</li>

= Maintenance =

= Maintenance =

The tube roller requires the following consumable parts:

The tube roller requires the following consumable parts: