Domain Admins
296
edits
Changes
From Pumping Station One
no edit summary
== Description ==
== Description ==
The Ironworking Station is a set of tools that allow simple shearing and bending operations to be performed in mild steel bar (or softer metals). Within their intended use range, these tools will make faster cleaner cuts than attempting to use a hand grinder or bandsaw. The Ironworking Station is comprised of several discrete tools mounted on a common stand. Th Ironworking Station currently consists of:
The Ironworking Station is a set of tools that allow simple shearing and bending operations to be performed in mild steel bar (or softer metals). Within their intended use range, these tools will make faster cleaner cuts than attempting to use a hand grinder or bandsaw. The Ironworking Station is comprised of several discrete tools mounted on a common stand. Th Ironworking Station currently consists of:
*Whitney angle iron shear
*Whitney No 5 angle iron shear
**max capacity 2inch x 2 inch x 1/4 inch mild steel angle iron, or 2inch x 1/4 inch bar stock
**max capacity 2inch x 2 inch x 1/4 inch mild steel angle iron, or 2inch x 1/4 inch bar stock
*Whitney No 62 angle iron shear
**max capacity 3 inch x 3 inch x 1/4 inch mild steel angle iron, or 3inch x 1/4 inch bar stock
*Whitney Angle iron notcher
*Whitney Angle iron notcher
**max capacity 2inch x 2 inch x 1/4 inch mild steel angle iron, or 2inch x 1/4 inch bar stock
**max capacity 2inch x 2 inch x 1/4 inch mild steel angle iron, or 2inch x 1/4 inch bar stock
*Whitney Angle iron bender
*Whitney Angle iron bender
**max capacity 2inch x 2 inch x 1/4 inch mild steel angle iron, or 2inch x 1/4 inch bar stock
**max capacity 2inch x 2 inch x 1/4 inch mild steel angle iron, or 2inch x 1/4 inch bar stock
*Whitney screw bender
**max capacity 3 inch x 3 inch x 1/4 inch mild steel angle iron, or 2inch x 1/4 inch bar stock
*Edwards 5a Alligator shear
*Edwards 5a Alligator shear
**max capacity 4inch x 1/2 inch mild steel bar stock, or 3/4 inch round stock
**max capacity 4inch x 1/2 inch mild steel bar stock, or 3/4 inch round stock
*Whitney No 20CTL 20 ton punch
**missing punch/die
**max capacity 1/2in hole in 1/2in thick bar.
*Whitney rod cutter:
*Whitney rod cutter:
**Needs rapir: die plate damaged
**Needs rapir: die plate damaged
**5/16, 1/2 or 3/4 inch mild steel rod.
**5/16, 1/2 or 3/4 inch mild steel rod.
*Marvel rod cutter
*Marvel rod cutter
** 1/8, 3/16, 1/4, 5/16, 3/8 mild steel rod
** 1/8, 3/16, 1/4, 5/16, 3/8 mild steel rod
