833
edits
Changes
From Pumping Station One
no edit summary
{{Template:EquipmentPage
{{Template:EquipmentPage
|owner = Theo Tetzlaff
|owner = Theo Tetzlaff
|hostarea = General Area
|Loaned Tool Agreement = yes
|hostarea = Kitchen
|certification = yes
|certification = yes
|hackable = no
|hackable = no
|serial = 2736
|serial = 2736
|arrived = June 2022
|arrived = June 2022
|where = General Area
|where = Kitchen
|doesitwork=yes
|doesitwork=yes
|contact = Theo Tetzlaff
|contact = Theo Tetzlaff
== Description ==
== Description ==
This is a Java Master 2002 fluid bed coffee roaster, capable of roasting up to 3.5 lbs green beans per batch.
This is a Java Master 2002 fluid bed coffee roaster, capable of roasting up to 3.5 lbs green beans per batch.
=== Loaned Tool ===
This is an official loaned tool with an active agreement on file accepted by a board member May 8th 2023.
== Roast Profile ==
== Roast Profile ==
* Get stuff ready:
* Get stuff ready:
** Get hopper, funnel, bags from Kitchen
** Get hopper, funnel, bags from Kitchen
** Weigh beans (Small Metals has a scale)
** Weigh beans (Kitchen has a scale)
* Turn Power on
* Turn Power on
* Turn Heat on
* Turn Heat on
* Check (and, if necessary, empty) chaff collector
* Check (and, if necessary, empty) chaff collector
* Turn on exhaust fan (switch on wall to the right of the machine)
* Set air and bean temperatures
* Set air and bean temperatures
* Put hopper in place over the blower vents
* Put hopper in place over the blower vents
* The operator can dump the beans now, or continue to cool the beans in the chamber. To dump:
* The operator can dump the beans now, or continue to cool the beans in the chamber. To dump:
** Press the Stop button.
** Press the Stop button.
** Pull the handle to dispense beans into hopper.
** Pull the handle to dispense beans into hopper immediately after the beans stop moving. (Leaving them sit still too long is a fire risk.)
** Let the air vents under the hopper cool the beans.
** Give the beans a sideways shake in the hopper and let the air vents under the hopper cool the beans.
* Bag the beans
* Bag the beans
* Turn off Heat and Power switches
* Turn off Heat and Power switches
* Turn off exhaust fan
* Turn off water and disconnect hose
* Return hopper, funnel, and supplies
* Return hopper, funnel, and supplies to Kitchen
== Safety ==
== Safety ==
* Minimum and maximum load are 1 - 3.5 lbs green beans.
* Minimum and maximum load are 1 - 3.5 lbs green beans.
* Make sure the chaff collector has adequate space. Empty it regularly.
* Make sure the chaff collector has adequate space. Empty it regularly.
* Do not operate without the water connected, the valve on, and the hose not kinked.
* Do not operate without water (this is permanently installed now so it should be fine.)
* Do not operate without the exhaust blower turned on.
* Beans above 300 F, without cooling air flow or not in motion in the roaster, can catch fire. Stopping the roast is therefore bad. A power outage during a roast is also bad. The roast should be allowed to complete.
* Beans above 300 F, without cooling air flow or not in motion in the roaster, can catch fire. Stopping the roast is therefore bad. A power outage during a roast is also bad. The roast should be allowed to complete.
* The roast can safely be stopped once bean temperature reaches the target, the cooling cycle engages, and the beans drop to 370 F. When this happens, the yellow Reset light will illuminate. Beans can be allowed to cool in the chamber, or the roast stopped with the Stop button and the beans then immediately dumped into the cooling hopper by using the lever. Fans on the tabletop in front of the roaster will blow cooling air over the roast beans. Beans will cool in the hopper via cooling fans within about 3-4 minutes after roast.
* The roast can safely be stopped once bean temperature reaches the target, the cooling cycle engages, and the beans drop to 370 F. When this happens, the yellow Reset light will illuminate. Beans can be allowed to cool in the chamber, or the roast stopped with the Stop button and the beans then immediately dumped into the cooling hopper by using the lever. Fans on the tabletop in front of the roaster will blow cooling air over the roast beans. Beans will cool in the hopper via cooling fans within about 3-4 minutes after roast.
|
|
|-
|-
|Ryan Pierce
|Riley Pierce
|Danger Committee/Manager/Trainer/BAMF
|Danger Committee/Manager/Trainer/BAMF
|
|
|-
|-
|Carl Karsten
|Carl Karsten
|Ryan Pierce
|Riley Pierce
|11/9/22
|11/9/22
|-
|-
|Ron Olson
|Ron Olson
|Ryan Pierce
|Riley Pierce
|11/16/22
|11/16/22
|-
|-
|Dan Wells
|Dan Wells
|Ryan Pierce
|Riley Pierce
|11/16/22
|11/16/22
|-
|-
|James Lamken
|James Lamken
|Ryan Pierce
|Riley Pierce
|11/16/22
|11/16/22
|-
|-
|-
|-
|Joseph Staffa
|Joseph Staffa
|Ryan Pierce
|Riley Pierce
|12/14/22
|12/14/22
|-
|-
|Andrew Wingate
|Andrew Wingate
|Ryan Pierce
|Riley Pierce
|1/3/23
|1/3/23
|-
|-
|Elizabeth Koprucki
|Elizabeth Koprucki
|Ryan Pierce
|Riley Pierce
|1/4/23
|1/4/23
|-
|-
|William Shehan
|William Shehan
|Ryan Pierce
|Riley Pierce
|1/5/23
|1/5/23
|-
|-
|Laura Sparks
|Laura Sparks
|Ryan Pierce
|Riley Pierce
|1/5/23
|1/5/23
|-
|-
|-
|-
|Ryan Mata
|Ryan Mata
|Ryan Pierce
|Riley Pierce
|2/8/23
|2/8/23
|-
|Dan Walsh
|Riley Pierce
|3/1/23
|-
|Ryan Helsing
|Riley Pierce
|3/29/23
|-
|David Earl
|Theo Tetzlaff
Riley Pierce (refresher 9/8/23)
|4/16/23
|-
|Jordan Kessel
|Theo Tetzlaff
|4/16/23
|-
|Aaron VerDow
|Theo Tetzlaff
|4/16/23
|-
|Jonathan Bisson
|Theo Tetzlaff
|5/3/23
|-
|Lucas Alvarez
|Theo Tetzlaff
|5/3/23
|-
|Bryan Sills
|Theo Tetzlaff
|5/3/23
|-
|Adam Stafford
|Riley Pierce
|5/17/23
|-
|James Nowell
|Riley Pierce
|6/7/23
|-
|Paulina Hubli
|Riley Pierce
|7/1/23
|-
|David Henderson
|Riley Pierce
|7/23/23
|-
|Jim Leonardson
|Riley Pierce
|9/13/23
|-
|Elizabeth Braun
|Riley Pierce
|9/13/23
|-
|Matthew Gaffney
|Riley Pierce
|9/13/23
|-
|Tam Ragatz
|Riley Pierce
|9/13/23
|-
|Stephen Metzel
|Riley Pierce
|9/27/23
|-
|Scott Yoder
|Riley Pierce
|9/27/23
|-
|Paul Johnson
|Riley Pierce
|11/13/23
|-
|John Jegerski
|Riley Pierce
|11/13/23
|-
|Nathan Dietz
|Riley Pierce
|11/13/23
|-
|Dan Tan
|Riley Pierce
|11/13/23
|-
|Burton Kent
|Riley Pierce
|12/9/23
|-
|Brent Myers
|Riley Pierce
|1/10/24
|-
|Molly Williford
|Riley Pierce
|1/10/24
|-
|Thomas Repasky
|Riley Pierce
|1/10/24
|-
|Saad Ali
|Riley Pierce
|1/10/24
|-
|Cris Sievenpiper
|Riley Pierce
|1/10/24
|-
|}
|}
''Please note, of these, I really can’t stress enough how generally superior and much more transparent + informative I find Sweet Maria’s compared to everywhere else. -Theo''
''Please note, of these, I really can’t stress enough how generally superior and much more transparent + informative I find Sweet Maria’s compared to everywhere else. -Theo''
''Sweet Maria’s is great for the beginning roaster because they provide highly detailed cupping notes, suggestions on what level of roast to use, and their opinion on whether something would make good espresso. But the quality of the beans is a function of the grower, not the importer, and a big part of this adventure is discovery and experimentation. So I’d suggest eventually branching out and trying other importers once you have some experience under your belt. -Ryan''
''Sweet Maria’s is great for the beginning roaster because they provide highly detailed cupping notes, suggestions on what level of roast to use, and their opinion on whether something would make good espresso. But the quality of the beans is a function of the grower, not the importer, and a big part of this adventure is discovery and experimentation. So I’d suggest eventually branching out and trying other importers once you have some experience under your belt. -Riley’'
== Maintenance ==
== Maintenance ==
|-
|-
|Clean two exhaust thermocouples
|Clean two exhaust thermocouples
|10/26/23
|12/30/23
|Ryan
|Ron and Riley
|
|-
|
|07/23/23
|Riley and David Henderson
|
|-
|
|05/27/23
|Riley
|
|-
|
|10/26/22
|Ron and Riley
|
|
|-
|-
|Clean glass chamber
|Clean glass chamber
|12/30/23
|Ron and Riley
|
|-
|
|07/23/23
|Riley and David Henderson
|
|-
|
|02/20/23
|02/20/23
|Theo
|Theo
|
|
|12/21/22
|12/21/22
|Ryan
|Riley
|
|
|-
|-
|
|
|10/24/22
|10/24/22
|Theo and Ryan
|Theo and Riley
|Spot cleaning only
|Spot cleaning only
|-
|-
|Clean upper duct
|Clean upper duct
|12/21/22
|12/21/22
|Ryan
|Riley
|Spot cleaning only
|Spot cleaning only
|-
|-
|
|
|10/24/22
|10/24/22
|Theo and Ryan
|Theo and Riley
|Spot cleaning only
|Spot cleaning only
|-
|-
|Vacuum clean air intake filter
|Vacuum clean air intake filter
|10/26/22
|10/26/22
|Ryan
|Riley
|
|
|-
|-
|Clean lower dump valve
|Clean lower dump valve
|12/21/22
|12/21/22
|Ryan
|Riley
|Spot cleaning only
|Spot cleaning only
|-
|-
|
|
|10/24/22
|10/24/22
|Theo and Ryan
|Theo and Riley
|Spot cleaning only
|Spot cleaning only
|-
|-
|Replace upper chamber gasket
|Replace upper chamber gasket
|12/21/22
|12/21/22
|Ryan
|Riley
|
|
|-
|-
|Clean hot air thermocouple
|Clean hot air thermocouple
|10/26/22
|10/26/22
|Ryan
|Riley
|
|
|-
|-
The roaster uses a Watlow PID controller (on the left) to control air temperature. It outputs a process value (4-20 mA), which an Avatar Instruments power controller uses to change the power to the heater via SCR phase dimming. The Avatar supports 240 V but the heater itself only can handle 208 V. This machine was designed to operate on 208 V but JavaMaster confirms it can operate on 240 V with an adjustment. Originally, JavaMaster suggested we limit the PID to 70% max output power. But that resulted in unexplained oscillations in temperature typically +/- 30 F. The Avatar includes an optional feature to limit output voltage via the V-LIM trim pot. This was adjusted so 100% on the PID corresponds to 208 V as measured by a true RMS voltmeter. If the machine is ever operated at 208 V again, it will require re-adjustment of this trim pot.
The roaster uses a Watlow PID controller (on the left) to control air temperature. It outputs a process value (4-20 mA), which an Avatar Instruments power controller uses to change the power to the heater via SCR phase dimming. The Avatar supports 240 V but the heater itself only can handle 208 V. This machine was designed to operate on 208 V but JavaMaster confirms it can operate on 240 V with an adjustment. Originally, JavaMaster suggested we limit the PID to 70% max output power. But that resulted in unexplained oscillations in temperature typically +/- 30 F. The Avatar includes an optional feature to limit output voltage via the V-LIM trim pot. This was adjusted so 100% on the PID corresponds to 208 V as measured by a true RMS voltmeter. If the machine is ever operated at 208 V again, it will require re-adjustment of this trim pot.
[[Category:Loaned Equipment]]
