833
edits
Changes
From Pumping Station One
no edit summary
|owner = Theo Tetzlaff
|owner = Theo Tetzlaff
|Loaned Tool Agreement = yes
|Loaned Tool Agreement = yes
|hostarea = Hot Metals
|hostarea = Kitchen
|certification = yes
|certification = yes
|hackable = no
|hackable = no
|serial = 2736
|serial = 2736
|arrived = June 2022
|arrived = June 2022
|where = General Area
|where = Kitchen
|doesitwork=yes
|doesitwork=yes
|contact = Theo Tetzlaff
|contact = Theo Tetzlaff
* Make sure the chaff collector has adequate space. Empty it regularly.
* Make sure the chaff collector has adequate space. Empty it regularly.
* Do not operate without water (this is permanently installed now so it should be fine.)
* Do not operate without water (this is permanently installed now so it should be fine.)
* Do not operate without the exhaust blower turned on.
* Beans above 300 F, without cooling air flow or not in motion in the roaster, can catch fire. Stopping the roast is therefore bad. A power outage during a roast is also bad. The roast should be allowed to complete.
* Beans above 300 F, without cooling air flow or not in motion in the roaster, can catch fire. Stopping the roast is therefore bad. A power outage during a roast is also bad. The roast should be allowed to complete.
* The roast can safely be stopped once bean temperature reaches the target, the cooling cycle engages, and the beans drop to 370 F. When this happens, the yellow Reset light will illuminate. Beans can be allowed to cool in the chamber, or the roast stopped with the Stop button and the beans then immediately dumped into the cooling hopper by using the lever. Fans on the tabletop in front of the roaster will blow cooling air over the roast beans. Beans will cool in the hopper via cooling fans within about 3-4 minutes after roast.
* The roast can safely be stopped once bean temperature reaches the target, the cooling cycle engages, and the beans drop to 370 F. When this happens, the yellow Reset light will illuminate. Beans can be allowed to cool in the chamber, or the roast stopped with the Stop button and the beans then immediately dumped into the cooling hopper by using the lever. Fans on the tabletop in front of the roaster will blow cooling air over the roast beans. Beans will cool in the hopper via cooling fans within about 3-4 minutes after roast.
|
|
|-
|-
|Ryan Pierce
|Riley Pierce
|Danger Committee/Manager/Trainer/BAMF
|Danger Committee/Manager/Trainer/BAMF
|
|
|-
|-
|Carl Karsten
|Carl Karsten
|Ryan Pierce
|Riley Pierce
|11/9/22
|11/9/22
|-
|-
|Ron Olson
|Ron Olson
|Ryan Pierce
|Riley Pierce
|11/16/22
|11/16/22
|-
|-
|Dan Wells
|Dan Wells
|Ryan Pierce
|Riley Pierce
|11/16/22
|11/16/22
|-
|-
|James Lamken
|James Lamken
|Ryan Pierce
|Riley Pierce
|11/16/22
|11/16/22
|-
|-
|-
|-
|Joseph Staffa
|Joseph Staffa
|Ryan Pierce
|Riley Pierce
|12/14/22
|12/14/22
|-
|-
|Andrew Wingate
|Andrew Wingate
|Ryan Pierce
|Riley Pierce
|1/3/23
|1/3/23
|-
|-
|Elizabeth Koprucki
|Elizabeth Koprucki
|Ryan Pierce
|Riley Pierce
|1/4/23
|1/4/23
|-
|-
|William Shehan
|William Shehan
|Ryan Pierce
|Riley Pierce
|1/5/23
|1/5/23
|-
|-
|Laura Sparks
|Laura Sparks
|Ryan Pierce
|Riley Pierce
|1/5/23
|1/5/23
|-
|-
|-
|-
|Ryan Mata
|Ryan Mata
|Ryan Pierce
|Riley Pierce
|2/8/23
|2/8/23
|-
|-
|Dan Walsh
|Dan Walsh
|Ryan Pierce
|Riley Pierce
|3/1/23
|3/1/23
|-
|-
|Ryan Helsing
|Ryan Helsing
|Ryan Pierce
|Riley Pierce
|3/29/23
|3/29/23
|-
|-
|David Earl
|David Earl
|Theo Tetzlaff
|Theo Tetzlaff
Riley Pierce (refresher 9/8/23)
|4/16/23
|4/16/23
|-
|-
|-
|-
|Adam Stafford
|Adam Stafford
|Ryan Pierce
|Riley Pierce
|5/17/23
|5/17/23
|-
|-
|James Nowell
|James Nowell
|Ryan Pierce
|Riley Pierce
|6/7/23
|6/7/23
|-
|-
|Paulina Hubli
|Paulina Hubli
|Ryan Pierce
|Riley Pierce
|7/1/23
|7/1/23
|-
|-
|David Henderson
|David Henderson
|Ryan Pierce
|Riley Pierce
|7/23/23
|7/23/23
|-
|-
|Jim Leonardson
|Jim Leonardson
|Ryan Pierce
|Riley Pierce
|9/13/23
|9/13/23
|-
|-
|Elizabeth Braun
|Elizabeth Braun
|Ryan Pierce
|Riley Pierce
|9/13/23
|9/13/23
|-
|-
|Matthew Gaffney
|Matthew Gaffney
|Ryan Pierce
|Riley Pierce
|9/13/23
|9/13/23
|-
|-
|Tam Ragatz
|Tam Ragatz
|Ryan Pierce
|Riley Pierce
|9/13/23
|9/13/23
|-
|-
|Stephen Metzel
|Stephen Metzel
|Ryan Pierce
|Riley Pierce
|9/27/23
|9/27/23
|-
|-
|Scott Yoder
|Scott Yoder
|Ryan Pierce
|Riley Pierce
|9/27/23
|9/27/23
|-
|-
|Paul Johnson
|Paul Johnson
|Ryan Pierce
|Riley Pierce
|11/13/23
|11/13/23
|-
|-
|John Jegerski
|John Jegerski
|Ryan Pierce
|Riley Pierce
|11/13/23
|11/13/23
|-
|-
|Nathan Dietz
|Nathan Dietz
|Ryan Pierce
|Riley Pierce
|11/13/23
|11/13/23
|-
|-
|Dan Tan
|Dan Tan
|Ryan Pierce
|Riley Pierce
|11/13/23
|11/13/23
|-
|Burton Kent
|Riley Pierce
|12/9/23
|-
|Brent Myers
|Riley Pierce
|1/10/24
|-
|Molly Williford
|Riley Pierce
|1/10/24
|-
|Thomas Repasky
|Riley Pierce
|1/10/24
|-
|Saad Ali
|Riley Pierce
|1/10/24
|-
|Cris Sievenpiper
|Riley Pierce
|1/10/24
|-
|}
|}
''Please note, of these, I really can’t stress enough how generally superior and much more transparent + informative I find Sweet Maria’s compared to everywhere else. -Theo''
''Please note, of these, I really can’t stress enough how generally superior and much more transparent + informative I find Sweet Maria’s compared to everywhere else. -Theo''
''Sweet Maria’s is great for the beginning roaster because they provide highly detailed cupping notes, suggestions on what level of roast to use, and their opinion on whether something would make good espresso. But the quality of the beans is a function of the grower, not the importer, and a big part of this adventure is discovery and experimentation. So I’d suggest eventually branching out and trying other importers once you have some experience under your belt. -Ryan''
''Sweet Maria’s is great for the beginning roaster because they provide highly detailed cupping notes, suggestions on what level of roast to use, and their opinion on whether something would make good espresso. But the quality of the beans is a function of the grower, not the importer, and a big part of this adventure is discovery and experimentation. So I’d suggest eventually branching out and trying other importers once you have some experience under your belt. -Riley’'
== Maintenance ==
== Maintenance ==
|-
|-
|Clean two exhaust thermocouples
|Clean two exhaust thermocouples
|12/30/23
|Ron and Riley
|
|-
|
|07/23/23
|07/23/23
|Ryan and David Henderson
|Riley and David Henderson
|
|
|-
|-
|
|
|05/27/23
|05/27/23
|Ryan
|Riley
|
|
|-
|-
|
|
|10/26/22
|10/26/22
|Ryan
|Ron and Riley
|
|
|-
|-
|Clean glass chamber
|Clean glass chamber
|12/30/23
|Ron and Riley
|
|-
|
|07/23/23
|07/23/23
|Ryan and David Henderson
|Riley and David Henderson
|
|
|-
|-
|
|
|12/21/22
|12/21/22
|Ryan
|Riley
|
|
|-
|-
|
|
|10/24/22
|10/24/22
|Theo and Ryan
|Theo and Riley
|Spot cleaning only
|Spot cleaning only
|-
|-
|Clean upper duct
|Clean upper duct
|12/21/22
|12/21/22
|Ryan
|Riley
|Spot cleaning only
|Spot cleaning only
|-
|-
|
|
|10/24/22
|10/24/22
|Theo and Ryan
|Theo and Riley
|Spot cleaning only
|Spot cleaning only
|-
|-
|Vacuum clean air intake filter
|Vacuum clean air intake filter
|10/26/22
|10/26/22
|Ryan
|Riley
|
|
|-
|-
|Clean lower dump valve
|Clean lower dump valve
|12/21/22
|12/21/22
|Ryan
|Riley
|Spot cleaning only
|Spot cleaning only
|-
|-
|
|
|10/24/22
|10/24/22
|Theo and Ryan
|Theo and Riley
|Spot cleaning only
|Spot cleaning only
|-
|-
|Replace upper chamber gasket
|Replace upper chamber gasket
|12/21/22
|12/21/22
|Ryan
|Riley
|
|
|-
|-
|Clean hot air thermocouple
|Clean hot air thermocouple
|10/26/22
|10/26/22
|Ryan
|Riley
|
|
|-
|-
