533
edits
Changes
From Pumping Station One
→Status
== Status ==
== Status ==
12/10/16 * A VFD has been fitted, this allows the machine to run on a 110v circuit and an variable speed control. The RPM display shows the RPM of the drive wheel (16"), the blade speed will be approx. 2.7 * RPM. The power switch on the left side applies power to the VFD. The on/off button on the front panel controls the blade and serves as an emergency switch, pull for on push for off. The dial controls RPM.
12/10/16 * A VFD has been fitted, this allows the machine to run on a 110v circuit and an variable speed control. The RPM display shows the RPM of the drive wheel (16"), the blade speed will be approx. 2.7 * RPM. The power switch on the left side applies power to the VFD. The on/off button on the front panel controls the blade and serves as an emergency switch, pull for on push for off. The dial controls RPM.
Open Tasks: 1. Label control box
Open Tasks: 1. Label control box 2. Modify gear cover or fabricate new one. 3. Wire end=of-cut switch to control box.
- Jim Brink
- Jim Brink
