Changes

== Status ==

== Status ==

* A VFD has been fitted, this allows the machine to run on a 110v circuit and provides a variable speed control. The RPM display shows the RPM of the drive wheel (16"), the blade speed will be approx. 4.18 * RPM. The power switch on the left side applies power to the VFD. The on/off button on the front panel controls the blade and serves as an emergency switch, pull for on push for off. The dial controls RPM.  

* A VFD has been fitted, this allows the machine to run on a 110v circuit and provides a variable speed control. The RPM display shows the RPM of the drive wheel (16"), the blade speed will be approx. 4.18 * RPM. The power switch on the left side of the control box applies power to the VFD. The on/off button on the front panel controls the blade and serves as an emergency switch, pull for on push for off. The dial controls RPM.  

Open Tasks: 1. Label control box    2. Modify gear cover or fabricate new one. 3. Wire end-of-cut switch to control box.  

Open Tasks: 1. Label control box    2. Modify gear cover or fabricate new one. 3. Wire end-of-cut switch to control box.  

- Jim Brink 12/10/16  

- Jim Brink 12/10/16