533
edits
Changes
Jump to navigation
Jump to search
Line 26:
Line 26: − + + +
Lassy Tapper Hand Tapping Machine (view source)
Revision as of 14:58, 21 June 2020
, 14:58, 21 June 2020→Instructions
File:Column_Stop.JPG | thumb | Column Height Adjust Collar
File:Column_Stop.JPG | thumb | Column Height Adjust Collar
File:Drill Chart in Cold Metals.JPG | thumb | Drill Chart in Cold Metals
File:Drill Chart in Cold Metals.JPG | thumb | Drill Chart in Cold Metals
File:IMG 0608.JPG | thumb | Cabinet for Lassy Tapper
File:IMG 0610.JPG | thumb | Cabinet for Lassy Tapper
</Gallery>
</Gallery>
The cabinet has the adapters arranged with the corresponding taps for the smaller sizes (<1/2"). It is also stocked with tapered and bottoming taps for the smaller sizes.
The column height above the bed can be adjusted by loosening the set screw in the knurled collar on the column with a 9/32" hex wrench and sliding the column up to the desired height while holding the collar in place. Tighten the set screw when the desired height is achieved.
The column height above the bed can be adjusted by loosening the set screw in the knurled collar on the column with a 9/32" hex wrench and sliding the column up to the desired height while holding the collar in place. Tighten the set screw when the desired height is achieved.