Changes

|8/31/2013

|8/31/2013

|Ryan Pierce

|Ryan Pierce

|Installed network software in C:\NETWORK. Used EZSETUP.EXE to configure Ethernet card for 0x280, IRQ 3, 0xCC00 as recommended in Leica

|Installed network software in C:\NETWORK. Used EZSETUP.EXE to configure Ethernet card for 0x280, IRQ 3, 0xCC00 as recommended in Leica manual. (Note: Memory address conflicts on factory setting. Use soft config jumper.) Set up DOS packet driver. Set up for BOOTP. Networking under DOS works, and the DHCP server will respond with the appropriate static IP. Moved unnecessary startup items to a new group so they do not launch on startup.

manual. (Note: Memory address conflicts on factory setting. Use soft config jumper.) Set up DOS packet driver. Set up for BOOTP. Networking

under DOS works, and the DHCP server will respond with the appropriate static IP. Moved unnecessary startup items to a new group so they do not launch on startup.

|-

|-

|8/30/2013

|8/30/2013

|Ryan Pierce

|Ryan Pierce

|Changed from backup hard drive to system hard drive. (Backup that Jay made works. Note that he must have taken the backup when the SEM

|Changed from backup hard drive to system hard drive. (Backup that Jay made works. Note that he must have taken the backup when the SEM was in a weird state; you will need to load one of the configs in the default user directory just to see beam and an image. The LUT may have the colors inverted too. Reminder: have Jay make another backup once we're good to go with networking.) Removed laser printer card. Installed SMC Elite 16 Ethernet card. Set up template user directory in C:\USER\TEMPLATE and set up C:\NEWUSER.BAT script to create new users. Put sensible default settings in the Template dir.

was in a weird state; you will need to load one of the configs in the default user directory just to see beam and an image. The LUT may have the colors inverted too. Reminder: have Jay make another backup once we're good to go with networking.) Removed laser printer card. Installed SMC Elite 16 Ethernet card. Set up template user directory in C:\USER\TEMPLATE and set up C:\NEWUSER.BAT script to create new

users. Put sensible default settings in the Template dir.

|-

|-

|7/23/2013

|7/23/2013