833
edits
Changes
Jump to navigation
Jump to search
Line 95:
Line 95: − +
Leica S430 Scanning Electron Microscope (view source)
Revision as of 03:28, 1 September 2013
, 03:28, 1 September 2013→Maintenance Log
|8/31/2013
|8/31/2013
|Ryan Pierce
|Ryan Pierce
|Installed network software in C:\NETWORK. Set up AUTOEXEC.BAT to launch DOS networking from startup. Used EZSETUP.EXE to configure Ethernet card for 0x280, IRQ 3, 0xCC00 as recommended in Leica manual. (Note: Memory address conflicts on factory setting. Use soft config jumper.) Set up DOS packet driver. Set up for BOOTP. Networking under DOS works, and the DHCP server will respond with the appropriate static IP. Note that attempts to run DOS networking commands under Windows generally will lock the machine; investigate Windows packet driver. Moved unnecessary startup items to a new group so they do not launch on startup and consume RAM.
|Installed network software in C:\NETWORK. Set up AUTOEXEC.BAT to launch DOS networking from startup. Used EZSETUP.EXE to configure Ethernet card for 0x280, IRQ 3, 0xCC00 as recommended in Leica manual. (Note: Memory address conflicts on factory setting. Use soft config jumper.) Set up DOS packet driver. Set up for BOOTP. Networking under DOS works, and the DHCP server will respond with the appropriate static IP. Installed WINPKT.COM which is necessary to allow apps under Windows to use the packet driver. Tested apps in a DOS box; work successfully. Moved unnecessary startup items to a new group so they do not launch on startup and consume RAM.
|-
|-
|8/30/2013
|8/30/2013