4/24/2017 - Printer bed connector is failing, could be failing print bed causing excess current draw; install solid state relay and if problem persist replace with silicone heater bed. Uneven extrusion or slippage, possible problem with the hobbed bolt; brass and is going bad; Should be replaced with stainless steel one. (ajasani) | 4/24/2017 - Printer bed connector is failing, could be failing print bed causing excess current draw; install solid state relay and if problem persist replace with silicone heater bed. Uneven extrusion or slippage, possible problem with the hobbed bolt; brass and is going bad; Should be replaced with stainless steel one. (ajasani) |