293
edits
Changes
Jump to navigation
Jump to search
Line 32:
Line 32: − + + − The Prusa i3 MK2S printer at IP address 10.100.1.203 uses OctoPrint as its host device. Enter that IP address into your web browser, via any computer/device on the PS1 network, to send jobs to the .203 printer. + − + + + + + + + + + + + + + + + + + + + + + + + + + +
→Operation
== Operation ==
== Operation ==
=== [[Prusa i3 OctoPrint Server]] ===
===Preparr the Printer===
====''1. Clean the nozzle''====
put info here
'''Note:''' the other two i3 3D printers (at 10.100.1.202 and .204) do not use OctoPrint. For those two printers, you must manually load your .STL files on a SD Card on a computer, then load the SD card in one of those printers.
====''2. Load material spool''====
put info here
====''3. Clean the bed''====
put info here
====''4. Set printer settings for your job''====
put info here
===Prepare Your .STL file===
Put info about Prusa Slicer here...
===Upload & Print Your .STL File===
====''The Prusa i3 MK2S printers at IP address 10.100.1.202 and 10.100.1.204''====
1. Load your .STL file onto an SD card (some are provided at PS1).
2. Insert SD card into printer.
3. Then...[put info here]
====''The Prusa i3 MK2S printer at IP address 10.100.1.203''====
This printer uses the [[Prusa i3 OctoPrint Server]] as its host device. Enter that IP address into your web browser, via any computer/device on the PS1 network, to send jobs to the .203 printer.
''Connecting to OctoPrint (.203 Printer Only)
Open a web browser connected to a computer/device on the PS1 network & enter 10.100.1.203 in the IP address field.
* When connecting to the OctoPrint server, you may first need to select "Connect" under the left side Connection tab if the printer has been turned off.
* When connecting to the OctoPrint server, you may first need to select "Connect" under the left side Connection tab if the printer has been turned off.