Domain Admins, Bureaucrats, Administrators
615
edits
Changes
Jump to navigation
Jump to search
Line 11:
Line 11: − + + + + + + + + + +
no edit summary
|arrived = 9/1/2012
|arrived = 9/1/2012
|doesitwork = WORKING
|doesitwork = WORKING
|contact = Shawn Blaszak
|contact = Adrianna McKinley
|where = Woodshop
|where = Woodshop
|value = $3,000.00
|value = $3,000.00
|itemphoto=[[File:SawStop.jpg|200px]]
|itemphoto=[[File:SawStop.jpg|200px]]
}}
}}
==Rules==
# Do not move the machine ever
# Always have the dust collection on. Turn it on before you plug in the saw and off after you unplug the saw.
# Never use the table as a work surface.
# Always check your wood for nails or staples. If you're not sure, check the entire piece with a magnet.
# If you break something, or damage the saw, contact the area host immediately. Don't let others do more damage or hurt themselves by using a broken tool.
# Always dust the entire machine when you are done. Also check after every use and vacuum out the motor compartment as needed.
# Always check your material on the blade before you spin up the blade.
==Notes==
==Notes==
* There's an m8 hole drilled and tapped in the mitre gauge. The post from a magnetic base of our dial indicators thread in. The post may require a spacer so the threads don't stick out (use a stack of washers or a larger-than-m8 nut).
* There's an m8 hole drilled and tapped in the mitre gauge. The post from a magnetic base of our dial indicators thread in. The post may require a spacer so the threads don't stick out (use a stack of washers or a larger-than-m8 nut).