14
edits
Changes
Jump to navigation
Jump to search
Line 2:
Line 2: − + − + Line 10:
Line 10: − + − + − Operational as of January 2017.+ + + + + + + + Line 40:
Line 47: + Line 46:
Line 54: + + + + + + + + + + Line 68:
Line 86: − + + Line 87:
Line 106: + + + + + + + Line 155:
Line 181: + + + + + + + + + + + + + + +
no edit summary
|owner = PS:One
|owner = PS:One
|serial = 5549
|serial = 5549
|certification = yes
|certification = Yes
|hackable = no
|hackable = Consult CNC Area Host
|model = ShapeOko 2 "The Works" version
|model = ShapeOko 2 "The Works" version
|arrived = 2014
|arrived = 2014
|where = [[Cold Metals]]
|where = [[Cold Metals]]
|value = $1000
|value = $1000
|image = ShapeOko2_September_2016.jpeg
|image = Shapeoko2.JPG
|hostarea = Cold Metals
|hostarea = Industrial CNC
}}
}}
== Status ==
== Status ==
Under construction.
Tuning, authorization path, and documentation are all being redeveloped as of February 24th, 2020.
== Authorization ==
== Authorization ==
Contact CNC Area Host for information on who conducts authorizations. If you are unable to get a response within 48hrs, post a request for authorization on the Pumping Station: One private Google Group.
Contact CNC Area Host for information on who conducts authorizations. If you are unable to get a response within 48hrs, post a request for authorization on the Pumping Station: One private Google Group.
== Tutorial ==
Tutorial on Fusion 360 to Shapeoko2 toolpath:
https://docs.google.com/document/d/1gzI5zgzzR_zRo9xr-SdSyWONMTeAq9PRUCJFRffS2FQ/edit?usp=sharing
== Operation ==
== Operation ==
** Do not over-tighten: if you over-tighten, the force can pull up the work surface.
** Do not over-tighten: if you over-tighten, the force can pull up the work surface.
* Check the envelope of the machine to ensure it will not crash into the rear dust guard - the grid of the work surface does not necessarily correspond to the grid in Easel.
* Check the envelope of the machine to ensure it will not crash into the rear dust guard - the grid of the work surface does not necessarily correspond to the grid in Easel.
* The clamp down studs are 5mm.
=== Collet & Bit Setup ===
=== Collet & Bit Setup ===
** If the bit is too deep in the collet, it can bottom out inside the spindle when you begin to tighten the collet.
** If the bit is too deep in the collet, it can bottom out inside the spindle when you begin to tighten the collet.
* Use 14mm wrenches (in the black bag) to tighten the collet. You don't need to over-tighten the collet - hand tighten, not gorilla tighten.
* Use 14mm wrenches (in the black bag) to tighten the collet. You don't need to over-tighten the collet - hand tighten, not gorilla tighten.
===Using Fusion 360===
You will need to install the Easel post processor in order to get usable GCode from Fusion 360 to the Shapeoko. The post processor is available here:
https://cam.autodesk.com/hsmposts?p=easel
When using Universal GCode Sender, you will get a "HOLD" error because it leads with a tool change (M6). The Shapeoko does not support a tool change command, and so simply hitting the "Play" button again will resume operation.
=== Carving with Easel ===
=== Carving with Easel ===
Easel is run in a browser, you must log in at Inventables http://easel.inventables.com/users/sign_in
* Select the correct material for the workpiece.
* Select the correct material for the workpiece.
* Set the appropriate bit parameters (e.g. upcut, ⅛" shank, number of flutes, bit shape).
* Set the appropriate bit parameters (e.g. upcut, ⅛" shank, number of flutes, bit shape).
== Known Issues ==
== Known Issues ==
* You will need to reset the Z after every carve operation. The machine loses Z calibration after each run, though it keeps XY home information.
* You will need to reset the Z after every carve operation. The machine loses Z calibration after each run, though it keeps XY home information.
* If you're having issues connecting to the Arduino, reboot the PC. It's good practice to start work by rebooting the PC regardless.
* If you're having issues connecting to the Arduino, reboot the PC. It's good practice to start work by rebooting the PC regardless (especially if anyone else is still logged in).
* If the spindle jams on something and then won't restart, check the fuse in the spindle controller (on the back of the cabinet). There may be spares in the drawer under the machine. It is a 5x20mm glass fuse, should be 6A but we've been using 5A because Home Depot stocks them.
== Modifications ==
== Modifications ==
[http://www.shapeoko.com/wiki/index.php/G-Code GRBL G & M Codes] Great G and M-code library of GRBL-supported codes (worth familiarizing yourself with)
[http://www.shapeoko.com/wiki/index.php/G-Code GRBL G & M Codes] Great G and M-code library of GRBL-supported codes (worth familiarizing yourself with)
[https://github.com/grbl/grbl/wiki/Connecting-Grbl GRBL pins] GRBL pins described
[https://www.synthetos.com/project/grblshield/ GRBL board used] GRBL board
[https://www.shapeoko.com/wiki/index.php/Universal-G-Code-Sender Universal Gcode Sender]
[https://www.shapeoko.com/wiki/index.php/Carbide_Create Carbide Create CAD software]
== Authorized Users ==
== Authorized Users ==
|[[User:ajasani | Ashish Jasani]]
|[[User:ajasani | Ashish Jasani]]
| Sevin Strauss
| Sevin Strauss
|-
|[[User:Daniel | Daniel Martinez]]
| Sevin Strauss
|-
|[[User:getavas | Gabe Tavas]]
| Sevin Strauss
|-
|[[User:bbarnt | Brian Barnt]]
| Jim Brink
|-
|[[User:bbay | Brandon Bay]]
| Jim Brink
|-
|[[User:Amethystdragon | Karl Schmidbauer]]
| Mike Thompson
|-
|-
|}
|}