14
edits
Changes
Jump to navigation
Jump to search
Line 2:
Line 2: − + − + Line 11:
Line 11: − + − Operational as of Feb 23 2018. We have plans to move the switches to the outside of the new cabinet but the machine works and is connected to the cold metals computer.+ + + Line 52:
Line 54: + + + + + + + + Line 76:
Line 86: − + + Line 174:
Line 185: − + + + + + + + + + +
no edit summary
|owner = PS:One
|owner = PS:One
|serial = 5549
|serial = 5549
|certification = no
|certification = Yes
|hackable = yes
|hackable = Consult CNC Area Host
|model = ShapeOko 2 "The Works" version
|model = ShapeOko 2 "The Works" version
|arrived = 2014
|arrived = 2014
|value = $1000
|value = $1000
|image = Shapeoko2.JPG
|image = Shapeoko2.JPG
|hostarea = Cold Metals
|hostarea = Industrial CNC
}}
}}
== Status ==
== Status ==
Under construction.
Tuning, authorization path, and documentation are all being redeveloped as of February 24th, 2020.
== Authorization ==
== Authorization ==
** If the bit is too deep in the collet, it can bottom out inside the spindle when you begin to tighten the collet.
** If the bit is too deep in the collet, it can bottom out inside the spindle when you begin to tighten the collet.
* Use 14mm wrenches (in the black bag) to tighten the collet. You don't need to over-tighten the collet - hand tighten, not gorilla tighten.
* Use 14mm wrenches (in the black bag) to tighten the collet. You don't need to over-tighten the collet - hand tighten, not gorilla tighten.
===Using Fusion 360===
You will need to install the Easel post processor in order to get usable GCode from Fusion 360 to the Shapeoko. The post processor is available here:
https://cam.autodesk.com/hsmposts?p=easel
When using Universal GCode Sender, you will get a "HOLD" error because it leads with a tool change (M6). The Shapeoko does not support a tool change command, and so simply hitting the "Play" button again will resume operation.
=== Carving with Easel ===
=== Carving with Easel ===
== Known Issues ==
== Known Issues ==
* You will need to reset the Z after every carve operation. The machine loses Z calibration after each run, though it keeps XY home information.
* You will need to reset the Z after every carve operation. The machine loses Z calibration after each run, though it keeps XY home information.
* If you're having issues connecting to the Arduino, reboot the PC. It's good practice to start work by rebooting the PC regardless.
* If you're having issues connecting to the Arduino, reboot the PC. It's good practice to start work by rebooting the PC regardless (especially if anyone else is still logged in).
* If the spindle jams on something and then won't restart, check the fuse in the spindle controller (on the back of the cabinet). There may be spares in the drawer under the machine. It is a 5x20mm glass fuse, should be 6A but we've been using 5A because Home Depot stocks them.
== Modifications ==
== Modifications ==
| Sevin Strauss
| Sevin Strauss
|-
|-
[[User:getavas | Gabe Tavas]]
|[[User:getavas | Gabe Tavas]]
| Sevin Strauss
| Sevin Strauss
|-
|[[User:bbarnt | Brian Barnt]]
| Jim Brink
|-
|[[User:bbay | Brandon Bay]]
| Jim Brink
|-
|[[User:Amethystdragon | Karl Schmidbauer]]
| Mike Thompson
|-
|-
|}
|}