6
edits
Changes
From Pumping Station One
→Tutorial
|owner = PS:One
|owner = PS:One
|serial = 5549
|serial = 5549
|certification = Yes
|certification = yes
|hackable = Consult CNC Area Host
|hackable = Consult CNC Area Host
|model = ShapeOko 2 "The Works" version
|model = ShapeOko 2 "The Works" version
}}
}}
= Status =
Open for authorizations.
Open for authorizations.
= ShapeOko 2 Specifications =
* Nominal Cutting Area 250mm x 250mm x 50mm (~10" x 10" x 2")
* Max spindle speed: 12,000 RPM
** Note: PS1 provided tooling & feeds and speeds are based around a fixed 12,000 RPM spindle speed.
The spindle uses ER11 collets. These eventually wear out, so check before using them. Collets are a durable expendable.
Users are welcome to purchase their own collets and tools in case the PS1 provided ones are insufficient.
== Authorization ==
== Authorization ==
== Tutorial ==
== Tutorial ==
Tutorial on Fusion 360 to Shapeoko2 toolpath:
[https://docs.google.com/document/d/1gzI5zgzzR_zRo9xr-SdSyWONMTeAq9PRUCJFRffS2FQ/edit?usp=sharing Tutorial on Fusion 360 to Shapeoko2 toolpath]
https://docs.google.com/document/d/1gzI5zgzzR_zRo9xr-SdSyWONMTeAq9PRUCJFRffS2FQ/edit?usp=sharing
[https://docs.google.com/presentation/d/1twCl4EozVH56VyWiRbVeoyJNx3ng16vBNbq8OlCA0d4/edit?usp=sharing ShapeOko 2 Quick Start Guide (Digital Version of the Binder)]
== Operation ==
== Operation ==
=== Workpiece Setup ===
=== Workpiece Setup ===
* Clamp work to the surface with the toe clamps (in the black bag or clear plastic tub.)
* [//https://youtu.be/r6DCvtcU8_M Using blue painter's tape on the bed and underside of the part and bonding the two with superglue is an extremely effective workholding solution.]
** The superglue never touches the bed itself nor the work, just the tape.
* Clamp work to the surface with the toe clamps (in the drawer under the machine.)
** Toe clamps need to be pushing down - so that the toe is angled down towards the workpiece - not angled up.
** Toe clamps need to be pushing down - so that the toe is angled down towards the workpiece - not angled up.
** After setting the height with the toe's rear bolt, lightly finger-tighten the bolt near the piece.
** After setting the height with the toe's rear bolt, lightly finger-tighten the bolt near the piece.
* Use 14mm wrenches (in the black bag) to tighten the collet. You don't need to over-tighten the collet - hand tighten, not gorilla tighten.
* Use 14mm wrenches (in the black bag) to tighten the collet. You don't need to over-tighten the collet - hand tighten, not gorilla tighten.
===Using Fusion 360===
=== Using Vectric VCarve ===
The post processor for use is going to be Grbl (inch) or Grbl (mm) depending on your document units. Vector files in a variety of formats from a variety of softwares (e.g. Adobe Illustrator, CorelDRAW, Inkscape, AutoCAD, etc.) can be imported to Vectric VCarve.
Members can use the VCarve Pro Trial Edition from home to set up their parts and save as a .crv file, though vector files can not be imported in the trial version. Files can only be posted from the Makerspace edition which we have at PS1.
GCode can be sent using Universal GCode Sender or Easel.
=== Using Fusion 360 ===
You will need to install the Easel post processor in order to get usable GCode from Fusion 360 to the Shapeoko. The post processor is available here:
You will need to install the Easel post processor in order to get usable GCode from Fusion 360 to the Shapeoko. The post processor is available here:
=== Carving with Easel ===
=== Carving with Easel ===
Easel is run in a browser, you must log in at Inventables http://easel.inventables.com/users/sign_in
Easel is run in a browser, you must log in at Inventables http://easel.inventables.com/users/sign_in
The Industrial CNC Area Host has an Easel Pro account through Inventables. If you would like to use this platform, email [email protected] for the login credentials.
* Select the correct material for the workpiece.
* Select the correct material for the workpiece.
