6
edits
Changes
From Pumping Station One
→Tutorial
|owner = PS:One
|owner = PS:One
|serial = 5549
|serial = 5549
|certification = Yes
|certification = yes
|hackable = Consult CNC Area Host
|hackable = Consult CNC Area Host
|model = ShapeOko 2 "The Works" version
|model = ShapeOko 2 "The Works" version
}}
}}
= Status =
Open for authorizations.
Open for authorizations.
== Tutorial ==
== Tutorial ==
Tutorial on Fusion 360 to Shapeoko2 toolpath:
[https://docs.google.com/document/d/1gzI5zgzzR_zRo9xr-SdSyWONMTeAq9PRUCJFRffS2FQ/edit?usp=sharing Tutorial on Fusion 360 to Shapeoko2 toolpath]
https://docs.google.com/document/d/1gzI5zgzzR_zRo9xr-SdSyWONMTeAq9PRUCJFRffS2FQ/edit?usp=sharing
[https://docs.google.com/presentation/d/1twCl4EozVH56VyWiRbVeoyJNx3ng16vBNbq8OlCA0d4/edit?usp=sharing ShapeOko 2 Quick Start Guide (Digital Version of the Binder)]
== Operation ==
== Operation ==
=== Workpiece Setup ===
=== Workpiece Setup ===
* Clamp work to the surface with the toe clamps (in the black bag or clear plastic tub.)
* [//https://youtu.be/r6DCvtcU8_M Using blue painter's tape on the bed and underside of the part and bonding the two with superglue is an extremely effective workholding solution.]
** The superglue never touches the bed itself nor the work, just the tape.
* Clamp work to the surface with the toe clamps (in the drawer under the machine.)
** Toe clamps need to be pushing down - so that the toe is angled down towards the workpiece - not angled up.
** Toe clamps need to be pushing down - so that the toe is angled down towards the workpiece - not angled up.
** After setting the height with the toe's rear bolt, lightly finger-tighten the bolt near the piece.
** After setting the height with the toe's rear bolt, lightly finger-tighten the bolt near the piece.
The post processor for use is going to be Grbl (inch) or Grbl (mm) depending on your document units. Vector files in a variety of formats from a variety of softwares (e.g. Adobe Illustrator, CorelDRAW, Inkscape, AutoCAD, etc.) can be imported to Vectric VCarve.
The post processor for use is going to be Grbl (inch) or Grbl (mm) depending on your document units. Vector files in a variety of formats from a variety of softwares (e.g. Adobe Illustrator, CorelDRAW, Inkscape, AutoCAD, etc.) can be imported to Vectric VCarve.
Members can use the VCarve Pro Trial Edition from home to set up their parts and save as a .crv file. Files can only be posted from the Makerspace edition which we have at PS1.
Members can use the VCarve Pro Trial Edition from home to set up their parts and save as a .crv file, though vector files can not be imported in the trial version. Files can only be posted from the Makerspace edition which we have at PS1.
GCode can be sent using Universal GCode Sender or Easel.
GCode can be sent using Universal GCode Sender or Easel.
