128
edits
Changes
Jump to navigation
Jump to search
Line 76:
Line 76: − + +
→Known Issues
== Known Issues ==
== Known Issues ==
* You will need to reset the Z after every carve operation. The machine loses Z calibration after each run, though it keeps XY home information.
* You will need to reset the Z after every carve operation. The machine loses Z calibration after each run, though it keeps XY home information.
* If you're having issues connecting to the Arduino, reboot the PC. It's good practice to start work by rebooting the PC regardless.
* If you're having issues connecting to the Arduino, reboot the PC. It's good practice to start work by rebooting the PC regardless (especially if anyone else is still logged in).
* If the spindle jams on something and then won't restart, check the fuse in the spindle controller (on the back of the cabinet). There may be spares in the drawer under the machine. It is a 5x20mm glass fuse, should be 6A but we've been using 5A because Home Depot stocks them.
== Modifications ==
== Modifications ==